Instrukcja obsługi X-Rite i1 Pro 3
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla X-Rite i1 Pro 3 (42 stron) w kategorii monitor. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/42
EN
3
EQUIPMENT INFORMATION
If this product is used in a manner not specified by the instruction, the safety protection provided by the device
may be impaired or become inoperable.
CE Declaration
Manufacturer’s Name: X-Rite, Incorporated
Authorized Representative: X-Rite, Incorporated
Siemensstraße 12b • 63263 Neu-Isenburg • Germany
Phone:+49 (0) 61 02-79 57-0 • Fax: +49 (0) 61 02 -79 57-57
Model Name: i1Pro
Directive(s) Conformance: EMC 2004/108/EC LVD 2006/95/EC
FEDERAL COMMUNICATIONS COMMISSION NOTICE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
INDUSTRY CANADA COMPLIANCE STATEMENT
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
NOTE: USB interface cable ( 2.0 m) shipped with this device must be used in order to maintain compliance with
the desired CE mark requirements, FCC Part 15
Rules, and Canadian ICES-003.
• Modifications not expressly approved by the manufacturer could void the user's authority to operate
Use of this equipment in a manner other than that specified by X-Rite, Incorporated may compromise
design integrity and become unsafe.
WARNING: This instrument is not for use in explosive environments.
ADVERTENCIA – NO use este aparato en los ambientes explosivos.
AVVERTIMENTO – NON usare questo apparecchio in ambienti esplosivi.
WARNUNG: Das Gerät darf in einer explosiven Umgebung NICHT verwendet werden.
AVERTISSEMENT: Cet instrument ne doit pas être utilisé dans un environnement explosif.
the equipment under FCC rules.
Safety InformationSafety InformationImportant Notices
CE Declaration
Hereby, X-Rite, Incorporated, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive(s) EMC 2014/30/EU, LVD 2014/35/EC,
and RoHS EU 2015/863.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
INDUSTRY CANADA COMPLIANCE STATEMENT
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
NOTE: USB interface cable shipped with this device must be used in order to maintain compliance with the desired
CE mark requirements, FCC Part 15 Rules, and Canadian ICES-003.
EN
4 5
User Manual
Table of contents
Package Contents 6
Device Overview 8
Installation 10
Device Status Indicators 12
Calibrating the Device 14
Scan Measurement 16
Single Pass Scan Measurement 20
Spot Measurement 22
Display Measurement 24
Ambient Light Measurement 26
Projector Measurement 28
General Maintenance 32
Troubleshooting 34
Warranty 36
Service and Support 37
Specication 38
English 5
Deutsch 43
Français 81
Italiano 119
Español 157
Português 195
日本語 233
한국어 271
简体中文 310
Specyfikacje produktu
| Marka: | X-Rite |
| Kategoria: | monitor |
| Model: | i1 Pro 3 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z X-Rite i1 Pro 3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje monitor X-Rite
28 Grudnia 2024
Instrukcje monitor
- monitor Mybeo
- monitor Eurolite
- monitor Legamaster
- monitor Freedom Scientific
- monitor Element
- monitor Thermaltake
- monitor Corsair
- monitor Fostex
- monitor Vivitek
- monitor AIS
- monitor IOIO
- monitor Shure
- monitor Japannext
- monitor Hanwha
- monitor Elvid
Najnowsze instrukcje dla monitor
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025