Instrukcja obsługi Xiaomi Deerma Humidifier
Xiaomi
Niesklasyfikowane
Deerma Humidifier
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Xiaomi Deerma Humidifier (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 3.7 gwiazdek
Strona 1/4
Deerma Humidier
Keep your life clean and refreshing all the time
With its micron mist and simply operation so that
to deeply moist your skin and each corner in your
house. You can enjoy every wonderful moment
when you use it.
Read the instructions carefully before use
Overview
1. Top cover;
2. Fog emitter exit;
3. Water tank;
4. UV light cover;
5. Wind exit;
6. Base;
7. Oil essense bre;
8. Oil essense lter;
9. Oil essense box;
10. Turning adjustor;
11. Light switch;
12. Water level indicator;
Light and turninng switch
1. Powered on. When you hear «Di», machine is on standby
status.
2. Light switch: press once: ambient orange light will be on,
press again to turn o the bottom light.
3. Turning button: clockwise turning: machine starts to work
and UV light is on. Anti clockwise turning is to switch o the
machine and turn o the UV light.
4. Water lack protection: when water tank is empty, you will
hear «dididi», bottom light will be red. Please, add water,
turn the button to o status and turn on again according to
step 3.
How to use
Humidier functions:
1. Add water to tank to higher indication level, but don`t
exceed.
2. Put the tank into the base.
3. When water level indicator arrow matches the arrow on
front of the base, put on the top cover.
4. Plug and it begins to humidify.
Aromatherapy
1. Take out the oil essense box and add a few drops of oil
essense.
2. Put the box into the base.
Note: Water can`t exceed the highest level mark,
otherwise, the wind exit will be ooded.
Fog leading tube cleaning
1. Use both hands to puswh the tube upward until you hear
a click sound.
2. Take the tube out and clean.
Note: Cleaning water higher than 50 degrees centigrade
will cause dis-shape of the water tank and fog leading tube.
Note
1. Adding a water: after the top cover is removed, you can
add water from the cup, or take out the water tank to tap to
add water.
2. Base water: the humidier uses the ultrasonic foggy ap
to change water to fog, water tank is media only. It`s normal
to humidier to accumulate water in thge base.
3. Foggy adjustment: if air humidity is high, there will be
water around humidier, please adjust fog to low level.
Fault and remove
1. Light is o, No wind and fog.
Analysis: Didn`t plug to socket or defective.
Solution: Connect to socket. If still don`t work, connect
Deerma.
2. Light is on, but no wind or fog.
Analysis: Water level is too high.
Solution: Pour out some water, and make the arrow of the
water level indicator meet arrow on the base.
3. Fog is little.
Analysis: Foggy at or water is dirty.
Solution: Clean the foggy at, change water to clear.
4. Noise sound.
Analysis: Water is less, desk is not at.
Solution: Add a clear water, put the humidier on strong at
surface.
5. Water can`t reach the bottom base.
Analysis: Water tank cover is dirty, or water tank is not
properly placed.
Solution: Clean the water tank cover and operate correctly.
Caution
1. Please, make shure power and voltage is in compliance
with requirements.
2. When you receive the humidier, please put it in room
temperature for 30 minutes, otherwise the water tank may
breaks due to high temperature change.
3. Please use the device under regular temperature
between 5-40 degrees centigrade.
4. Please put the humidier on a at space and avoid to
leaning.
5. Please don`t put the humidier on wood oor to avoid its
deformation due to humidity.
6. Please keep the device on 2m destance away from
furniture and electric devices.
7. Please avoid heat and direct sun rays.
8. Using a water over 40 degrees forbidden.
9. Avoid presence of water in wind and fog exit, use a dry
mop to clean the water if its ow through it.
10. When room temperature is lower than 0 degrees,
please pour out water to avoid its freezing.
11. Don`t put metal liquid, cleaqning liquid or chemical
solutions into the tank.
12. Plug o the device from socket when you pour a water.
13. Plug o the device from socket before moving,
cleaning, adding a water etc.
14. When cleaning, avoid to water injection into machine.
15. Don`t dissasemble original machine without approval.
MIOT.UA
Specyfikacje produktu
| Marka: | Xiaomi |
| Kategoria: | Niesklasyfikowane |
| Model: | Deerma Humidifier |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Xiaomi Deerma Humidifier, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Xiaomi
30 Grudnia 2025
2 Października 2024
30 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
24 Września 2024
21 Września 2024
21 Września 2024
20 Września 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane LogiLink
- Niesklasyfikowane Vivanco
- Niesklasyfikowane Unicol
- Niesklasyfikowane Bifinett
- Niesklasyfikowane Burg Wächter
- Niesklasyfikowane Exelpet
- Niesklasyfikowane Miditech
- Niesklasyfikowane Bayco
- Niesklasyfikowane Eldat
- Niesklasyfikowane Cool Head
- Niesklasyfikowane Energenie
- Niesklasyfikowane SolarEdge
- Niesklasyfikowane Tech 21
- Niesklasyfikowane Tennsco
- Niesklasyfikowane MSW
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025