Instrukcja obsługi Yamaha NTX700C

Yamaha gitara NTX700C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Yamaha NTX700C (1 stron) w kategorii gitara. Ta instrukcja była pomocna dla 44 osób i została oceniona przez 22.5 użytkowników na średnio 3.8 gwiazdek

Pobierz PDF

Strona 1/1

PRECAUTIONS

Always set the VOLUME control to “0” when plugging in or unplug-

ging the connection cable.

The battery check indicator (BATT.) will light brieﬂy when a guitar

cable is inserted or removed from the output jack. This is normal

and does not indicate a malfunction.

The built-in preamplifier is automatically turned on when a guitar

cable is inserted into the output jack. When not using the instrument,

or when playing it without ampliﬁcation, be sure to remove the guitar

cable from the output jack so that the preampliﬁer power is turned off.

Also, even when the power is switched off, the system consumes a

small amount of power for the tuner standby mode. If the instrument is

not going to be used for an extended period of time, we recommend that

the battery be removed in order to avoid power consumption or leakage.

Owner’s Manual

Thank you for choosing a Yamaha electric-acoustic guitar.

In order to make the most of the advanced features and per-

formance provided by your guitar, please read this manual

carefully before using the instrument.

BATTERY REPLACEMENT

Be sure to replace the battery as soon as possible when the battery

check indicator lights in order to avoid reduced sound quality.

q Press the release lever on the battery holder in the direction indicated

by the arrow in the illustration in order to unlock it.

w Slide out the battery case.

e Remove the old battery from the battery case, and insert the new bat-

tery making sure that the (+) and (–) terminals of the battery are posi-

tioned as shown in the illustration. Use only a DC9V, S-006P (6F22) or

equivalent battery.

*Neverdismantlethebatteriesandneverdisposebatteriesinre.

*

Nevertouchanyuidthatmayleakfromthebattery.Iftheuidshouldcomeincon-

tactwiththeeyes,mouth,orskin,washimmediatelywithwaterandconsultadoctor.

*Alwaysdisposebatteriesinaccordancewithlocallawsandregulations.

Slide the battery case back into the battery holder and press ﬁrmly

so that the battery case locks into place.

ELECTRIC

ACOUSTIC GUITAR

NOMENCLATURE/THE CONTROLS

SPECIFICATIONS

System SYSTEM-61: Monaural 2 way

Pickup Contact Pickup (installed inside of the body)

Pre-amplifier Controls

MASTER VOL., 3 Band (HIGH, MID, LOW) EQ

control, PICKUP MIX control (TREBLE SIDE,

BASS SIDE)

Output jack Combination end pin/power switch

Output impedance 1 kΩ

Power supply 9V DC, S-006P (6F22, 6LR61) dry cell battery

Battery life Approx. 80 hours (without tuner)

Approx. 70 hours (with the preamp switched

ON and the tuner used 2 minutes every 1 hour)

 *Whenusingamanganesebattery.

 *Variesaccordingtooperatingconditions.

Tuner Tuning System: Chromatic type (12 semi-

tones), A4=440Hz

Auto OFF Function: Tuner automatically

switches OFF after 2 minutes.

Input : Built in pickup

Pitch Accuracy Range: +/– 3 cents

Accessories • Hexagonal wrench for neck adjustment x1

• S-006P (6F22) dry cell battery x1

• Sound hole cover x1

USING THE TUNER

The guitar is equipped with an A4=440Hz standard pitch tuner. The

tuner’s circuitry is independent from the guitar’s output circuit so switch-

ing the tuner ON/OFF will have no affect on sound output.

q Press the TUNER switch. While the tuner activates the and

lamps ﬂash simultaneously.

w Tune the guitar string until the note name of the desired pitch appears

in the tuner’s display.

The lamp indicates the pitch is low.

The lamp indicates the pitch is high.

The pitch indicator ( ) ﬂashes slower as the string’s pitch nears

the note shown in the display.

e The string is in tunewhen the and lamps both light.

r Press the TUNER switch again to switch the tuner OFF.

*

ThetunerwillautomaticallyswitchOFFapproximatelytwominutesaftertheTUNERswitch

ispressed(energysavingfunction).Tocontinuetuning,presstheTUNERswitchagain.

*

ItmaytakeafewsecondsbeforethetunercandetectpitchesafterbeingswitchedON.

*The note name and displays may have difculty keeping up withirregular

pitchchanges.Graduallychangethepitchandcheckwhentuning.

*

Thetunermayhavedifcultydetectingnotesrichwithovertonesorwithveryshortsustain.

*Thebatterycheckindicatormaylightmomentarilywhenthetunerbuttonispressed.

Thisisnotasignhowever,thatthebatterypowerislow.Thebatterycheckindicator

lightscontinuouslywhenbatterypowerislow.Pleasechangethebatteryatthistime.

MASTER VOL. (Master Volume) Control

Adjusts the overall output volume level.

*MakesurethattheMASTERVOL.isturnedto“0”beforeconnectingordis-

connecting.

BATT. (Battery Check) Indicator

This indicator will light when the battery needs to be replaced. Please

replace the battery as soon as possible when the BATT. indicator lights.

*ThebatterycheckindicatormaylightmomentarilywhentheTUNERswitchis

pressed.Thisisnotasignhowever,thatthebatterypowerislow.

3 Band Equalizer

LOW : Boosts or cuts the level of the low frequencies.

MID : Boosts or cuts the level of the middle frequencies.

HIGH : Boosts or cuts the level of the high frequencies.

PICKUP MIX Control

Independent controls for the treble and bass side pickups deliver a wide

range of tonal variation with exceptional quality.

TREBLE : Controls the volume of the treble side pickup.

BASS : Controls the volume of the bass side pickup.

*Thesystemwill notproducesoundwhenboththe TREBLESIDEandBASS

SIDEcontrolsaresetto“0”,evenifthemastervolumecontrolisturnedup.

Tuner Switch

Switches the tuner ON/OFF.

Tuner Display

Displays tuner information.

USING THE SOUND HOLE COVER

Feedback often occurs when controls are boosted on the electric acoustic

guitar to match the volume of other instruments when playing in a band.

When the instrument is used under the conditions described above, the

Sound Hole Cover should be inserted into the sound hole.

With the Sound Hole Cover in place, feedback is effectively reduced.

OPE N

Release lever

DC9V S-006P

(6F22)

Battery case

OPEN

w, r e

–12 +12

HIGH

BATT. T UNER

PICKUP MIX

BASS SIDE T REBLE S IDE

–12 +12

MID

MAST ER

VOL.

LOW

0 10

0 10 0 10

q MASTER VOL.

Bass Side

Pickup

Mix of Bass

Side Pickup

Treble Side

Pickup

Mix of Treble

Side Pickup

Battery compartmentControl Section

Output Jack (with power switch function)

Sound Hole Cover

for feedback control

(Accessory)

Pickups

Specyfikacje produktu

Marka:	Yamaha
Kategoria:	gitara
Model:	NTX700C

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Yamaha NTX700C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje gitara Yamaha

Yamaha PAC1611MS Instrukcja

15 Stycznia 2025

Yamaha THRC112 Instrukcja

11 Grudnia 2024

Yamaha SessionCake SC-02 Instrukcja

11 Grudnia 2024

Yamaha THRC212 Instrukcja

11 Grudnia 2024

Yamaha JR2 Instrukcja

4 Października 2024

Yamaha FGX700SC Instrukcja

16 Września 2024

Yamaha GC42C Instrukcja

14 Września 2024

Yamaha NTX500 Instrukcja

12 Września 2024

Yamaha TRBX305 Instrukcja

12 Września 2024

Yamaha NTX700C Instrukcja

11 Września 2024

Instrukcje gitara

Najnowsze instrukcje dla gitara

Behringer B-TRON III Envelope Filter Instrukcja

2 Kwietnia 2025

Behringer V-AMP 2 Instrukcja

1 Kwietnia 2025

Behringer Octavia Octave Fuzz Instrukcja

1 Kwietnia 2025

Harley Benton Electric Guitar Kit JA Instrukcja

4 Marca 2025

Fender Classic Series 60s Telecaster Instrukcja

11 Stycznia 2025

Behringer BASS BRASSMASTER FUZZ Instrukcja

7 Stycznia 2025

Behringer CENTAUR OVERDRIVE Instrukcja

7 Stycznia 2025

Behringer FUZZ BENDER Instrukcja

7 Stycznia 2025

Marshall ShredMaster Instrukcja

31 Grudnia 2025

Marshall The Guv'nor Instrukcja

31 Grudnia 2025