Instrukcja obsługi ZKTeco SF420

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ZKTeco SF420 (2 stron) w kategorii System kontroli dostępu. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 6 użytkowników na średnio 5.0 gwiazdek

SF420

IP Based Fingerprint

Access Control &

Time Attendance

SF420 is an IP based fingerprint terminal with both Network and Standalone

operation modes. It is connectible with ZKAccess 3.5 software for access control

and time attendance management.

With Wiegand output, SF420 is flexible to connect with ZK or any 3rd party

controllers as a slave reader. Wiegand input configures two SF420 units to utilize

Master & Slave solution to enable users verification at both entrance and exit. Anti-

passback function is also enabled to maximize the security level.

Auxiliary input interface allows SF420 to connect with an extra source, for instance, a

smoke detector or emergency switch. Once the linkage function is enabled through

the machine menu, the device generates an alarm signal and

opens doors in case of emergency.

Feature

• 2.8-inch touch screen, color display with

graphical UI for easy operation

• Up to 24 user-de ned schedules that can be

activated on a daily bell alert (optional)

• Prompt audio acceptance or rejection signals

for valid or invalid  ngers

• Compact and lightweight, small size for

86mm (L) x 86mm (H) socket installation

• TCP/IP or RS485 communication for various

networking environments

• Supports USB  ash drive for o ine

data management

• Built-in auxiliary input with enhanced  exibility to

link with wired detector or emergency switch

• Up to 15 multi-veri cation methods to

enhance security level

• Standard access control features such as Time zone,

Holiday, A&C Group, Unlock combination etc.

• Duress Alarm o ers e ective protection against

duress by threats

• Tamper proof switch and multiple alarm outputs

• Multi-languages display available on request

Specyfikacje produktu