Instrukcja obsługi 4ms Row Power 35

4ms klawiatura Row Power 35

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla 4ms Row Power 35 (1 stron) w kategorii klawiatura. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 3.5 użytkowników na średnio 4.6 gwiazdek

Strona 1/1
Row Power 25
4ms Company
Eurorack Power Module
User Manual 1.0 – Sept. 24, 2019
!
The Row Power 25 is a power supply module for the Eurorack modular system. It
requires a barrel-style power brick (15V – 20V DC) and supplies power to modules
via flying bus cables, direction connection, and/or bus boards using the single
standard 16-pin Eurorack header on the back. For custom power systems, the
MTA156 connectors to connect to distribution bus boards.!
Multiple Row Power modules can be powered from a single power brick by
daisy-chaining with an inexpensive barrel cable. The Row Power 25 can also be
daisy-chained to 4ms Company’s Pod enclosures.!
Maximum and recommended power output:
+12V: 1.4A maximum, 1.0A recommended!
-12V: 0.8A maximum, 0.5A recommended!
+5V: 1.0A maximum, 0.8A recommended!
Maximum power output can be expected under normal operating conditions.
Recommended power output is guaranteed under extreme temperature and limited airflow
conditions.
Power Brick:
Available wherever Row Power modules are sold.!
You may use your own power brick if it meets the following:!
15VDC to 20VDC!
Minimum 30W output power!
Positive center 2.1mm barrel plug!
Low-noise output!
Features:
Two identical barrel power jacks at top and bottom for daisy-chaining (either
jack can be used for power input or chaining)!
!On/off switch
!LED indicates +/-12V rails are functioning
!25.6mm (1.01”) deep with power cable attached
!22.0mm (0.87”) with no power cable (when using solder points)
#4HP
Page of 1 4


Specyfikacje produktu

Marka: 4ms
Kategoria: klawiatura
Model: Row Power 35

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z 4ms Row Power 35, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą