Instrukcja obsługi ACP MMS10TS
ACP
Magnetostrykcja
MMS10TS
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ACP MMS10TS (12 stron) w kategorii Magnetostrykcja. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
Commercial Microwave Oven
Keep these instructions for future reference.
If the oven changes ownership, this manual
must accompany oven.
Owner’s Manual
Contents
Model Identication ........................... 2
Precautions to avoid possible
exposure to excessive
microwave energy .............3
Important safety
instructions ........................... 3
Installation ........................................ 5
Earthing Instructions ......................... 5
Electronic Control Operation ............. 6
Dial Control Operation ..................... 10
Care and Cleaning ...........................11
Before Calling for Service ............... 12
©2017 ACP, Inc.
Cedar Rapids, IA 52404 Page 2 of 12
Part No. 20042803
Revised 03/31/2017
Any questions or to locate an authorized ACP servicer,
call toll free 1-866-426-2621 inside the U.S.A or Canada,
or 1-319-368-8120 outside the U.S.A or Canada.
Warranty service must be performed by an authorized
ACP servicer. ACP also recommends contacting an
authorized ACP servicer if service is required after
warranty expires.
Model Identication
When contacting ACP, provide product information. Product information is located on oven serial plate which is
located on the back side of the oven. Record the following information:
Model Number: _____________________________
Manufacturing Number: _______________________
Serial or S/N Number: ________________________
Date of purchase: ___________________________
Dealer’s name and address: ___________________
__________________________________________
__________________________________________
__________________________________________
©2017 ACP, Inc.
Cedar Rapids, IA 52404 Page 3 of 12
Part No. 20042803
Revised 03/31/2017
PRECAUTIONS TO AVOID POSSIBLE
EXPOSURE TO EXCESSIVE MICROWAVE
ENERGY
A. DO NOT attempt to operate this oven with the door open since open door operation can result in harmful
exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.
B. DO NOT place any object between the oven front face and the door or allow soil or cleaner residue to
accumulate on sealing surfaces.
C. DO NOT operate the oven if it is damaged. It is particularly important that the oven door close properly and
that there is no damage to the:
1. door (bent)
2. hinges and latches (broken or loosened)
3. door seals and sealing surfaces.
D. The oven should not be adjusted or repaired by anyone except properly qualied service personnel.
SAVE THESE INSTRUCTIONS
1. READ all instructions before using equipment.
2. READ AND FOLLOW the specic
“PRECAUTIONS TO AVOID POSSIBLE
EXPOSURE TO EXCESSIVE MICROWAVE
ENERGY” on this page.
3. This equipment MUST BE EARTHED. Connect
only to properly EARTHED outlet. See
“EARTHING INSTRUCTIONS” on page 5.
4. Install or locate this equipment ONLY in
accordance with the installation instructions in
this manual.
5. Some products such as whole eggs and sealed
containers—for example, closed glass jars—are
able to explode and SHOULD NOT be HEATED
in this oven.
6. Use this equipment ONLY for its intended use as
described in this manual. Do not use corrosive
chemicals or vapors in this equipment. This type
of oven is specically designed to heat, cook,
or dry food. It is not designed for industrial or
laboratory use.
7. As with any equipment, CLOSE SUPERVISION
is necessary when used by CHILDREN.
8. See door cleaning instructions in the product
safety manual.
9. DO NOT heat baby bottles in oven.
10. Baby food jars shall be open when heated and
contents stirred or shaken before consumption, in
order to avoid burns.
11. DO NOT operate this equipment if it has a
damaged cord or plug, if it is not working properly,
or if it has been damaged or dropped.
12. This equipment, including power cord, must be
serviced ONLY by qualied service personnel.
Special tools are required to service equipment.
Contact nearest authorized service facility for
examination, repair, or adjustment.
13. DO NOT cover or block lter or other openings on
equipment.
14. DO NOT store this equipment outdoors. DO NOT
use this product near water – for example, near a
kitchen sink, in a wet basement, a swimming pool,
or a similar location.
15. DO NOT immerse cord or plug in water.
16. Keep cord AWAY from HEATED surfaces.
17. DO NOT let cord hang over edge of table or
counter.
18. For commercial use only.
!
WARNING
When using electrical equipment, basic safety precautions should be followed to reduce the risk of burns,
electrical shock, re, or injury to persons.
IMPORTANT SAFETY INSTRUCTIONS
Recognize this symbol as a SAFETY message
Specyfikacje produktu
| Marka: | ACP |
| Kategoria: | Magnetostrykcja |
| Model: | MMS10TS |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z ACP MMS10TS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Magnetostrykcja ACP
30 Stycznia 2025
28 Stycznia 2025
27 Stycznia 2025
19 Stycznia 2025
19 Stycznia 2025
18 Stycznia 2025
18 Stycznia 2025
18 Stycznia 2025
18 Stycznia 2025
18 Stycznia 2025
Instrukcje Magnetostrykcja
- Technolux
- Denver
- LERAN
- Artusi
- Siméo
- Fulgor Milano
- Tower
- Emerson
- De Dietrich
- Neff
- Atag
- Malmbergs
- Milectric
- Vivax
- Stoves
Najnowsze instrukcje dla Magnetostrykcja
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025