Instrukcja obsługi ADE Diagonal SN1
ADE
maszyna do cięcia
Diagonal SN1
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ADE Diagonal SN1 (57 stron) w kategorii maszyna do cięcia. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.3 gwiazdek
Strona 1/57
Gravity feed slicer
DIAGONAL SN
DiagonalSN-210927-Rev009-UM-en
Manufacturer:
ADE Germany GmbH | Neuer Höltigbaum 15 | 22143 Hamburg, Germany
Tel.: +49 (0) 40 / 432776-0 | Fax: +49 (0) 40 / 432776-10
E-mail: info@ade-hamburg.de
Operating Manual | EN
Translated manual
2DiagonalSN-210927-Rev009-UM-en
TABLE OF CONTENTS
About this manual ................................................................................... 3
General information .......................................................................... 3
Storage .............................................................................................. 3
Target group ...................................................................................... 3
Explanation of symbols ..................................................................... 4
Intended use ...................................................................................... 4
Scope of delivery 4 ...............................................................................
Optional accessories 5 .........................................................................
Dealer ...................................................................................................... 5
Safety ...................................................................................................... 6
Training the operating personnel ........................................................... 8
Parts and controls 9 ...................................................................................
Start-up ................................................................................................. 12
Notes on the installation site .......................................................... 12
Unpacking and installing the machine ............................................ 12
Switching the machine on ............................................................... 12
Switching the machine off............................................................... 12
Installing the machine ..................................................................... 13
Conducting an acceptance inspection 13 ............................................
Cleaning before the first use 13 ...........................................................
Slicing food ............................................................................................ 14
Cleaning ................................................................................................. 17
Changing/replacing the circular blade .................................................. 22
Maintenance and care .......................................................................... 22
Sharpening the blade ............................................................................ 24
Storage and transport ........................................................................... 26
Technical data ....................................................................................... 27
Name plate ............................................................................................ 27
Warranty ............................................................................................... 27
Declaration of conformity .................................................................... 28
Disposal ................................................................................................. 28
Appendix ............................................................................................... 29
About this manual
3
DiagonalSN-210927-Rev009-UM-en
ABOUT THIS MANUAL
GENERAL INFORMATION
This operang manual describes the safe operaon as well as the handling, care and
maintenance of the machine.
Only compliance with the operating manual is considered to be proper use.
Therefore, read this operang manual carefully before connecng and using the
machine. Failure to observe this operang manual may result in injuries or damage to
your product.
Our products are constantly being developed and improved. For this reason, design
and technical modicaons are possible at any me. However, this has no inuence
on the content of this manual.
The slicer is designed and assessed in accordance with the latest version of the EN
1974 Safety Standard and bears the CE mark as a sign of conformity with the relevant
requirements.
Producon based on the technical documents supplied is not permied.
STORAGE
The operating manual is an integral part of the machine. It must be kept in the immediate
vicinity of the machine and be easily accessible to everyone.
If the machine is resold, the operating manual must be included.
TARGET GROUP
This operating manual is intended for personnel entrusted with the installation, handling,
care and maintenance of the machine.
Personnel who operate the machine must have read and understood this operang
manual before using it for the rst me and must have been instructed in the
operaon of the machine by the owner/operator. Above all, the dangers arising from
improper use must therefore be pointed out. The owner/operator must ensure that
the operang personnel (“operators”) are able to use the machine as intended and
safely.
Maintenance and adjustment work, e.g. blade sharpening, may only be carried out by
authorised and trained personnel.
Specyfikacje produktu
| Marka: | ADE |
| Kategoria: | maszyna do cięcia |
| Model: | Diagonal SN1 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z ADE Diagonal SN1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna do cięcia ADE
25 Września 2024
25 Września 2024
25 Września 2024
15 Września 2024
14 Września 2024
1 Września 2024
26 Sierpnia 2024
19 Sierpnia 2024
17 Sierpnia 2024
6 Sierpnia 2024
Instrukcje maszyna do cięcia
- maszyna do cięcia Maruyama
- maszyna do cięcia GOTIE
- maszyna do cięcia Nesco
- maszyna do cięcia Avantco
- maszyna do cięcia Festool
- maszyna do cięcia Prince Castle
- maszyna do cięcia BEEM
- maszyna do cięcia PowerPlus
- maszyna do cięcia Hendi
- maszyna do cięcia Team
- maszyna do cięcia Unold
- maszyna do cięcia G3 Ferrari
- maszyna do cięcia Sunbeam
- maszyna do cięcia Borner
- maszyna do cięcia Weston
Najnowsze instrukcje dla maszyna do cięcia
27 Marca 2025
27 Marca 2025
18 Lutego 2025
13 Lutego 2025
9 Lutego 2025
8 Lutego 2025
1 Lutego 2025
31 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025