Instrukcja obsługi ADE MARE350
ADE
maszyna do cięcia
MARE350
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ADE MARE350 (16 stron) w kategorii maszyna do cięcia. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
OPERATING
INSTRUCTIONS
Fi
MARE350
Mare350- -Rev001- - 230217 UM en
1 Mare350- -Rev001- -230217 UM en
CONTENTS
1. FOREWORD ......................................................................................................................... 2
1.1 Introduction ............................................................................................................................ 2
1.2 Intended use .......................................................................................................................... 2
1.3 Residual risks ........................................................................................................................ 3
2. START- 3UP.............................................................................................................................
2.1 Installation ............................................................................................................................. 3
2.2 Wiring .................................................................................................................................... 4
2.3 Mechanical safety devices ..................................................................................................... 4
2.4 Electrical safety devices 4 .........................................................................................................
2.5 Acceptance testing ................................................................................................................ 4
2.6 Safety precautions ................................................................................................................. 4
2.7 Using the machine ................................................................................................................. 5
3. USING THE SLICER ............................................................................................................. 6
3.1 Machine overview .................................................................................................................. 6
3.2 Operating functions ................................................................................................................ 7
3.3 Switching on .......................................................................................................................... 7
3.4 Feeding the product ............................................................................................................... 7
3.5 Adjusting the slice thickness .................................................................................................. 7
4. SHARPENING THE BLADE .................................................................................................. 7
5. CLEANING AND CARE ....................................................................................................... 10
5.1 Cleaning .............................................................................................................................. 10
5.2 Lubricating ........................................................................................................................... 11
6. TRAINING ........................................................................................................................... 11
7. DISPOSAL .......................................................................................................................... 11
8. WARRANTY ........................................................................................................................ 11
9. TECHNICAL DATA .............................................................................................................. 12
10. CE MARKING AND DECLARATION OF CONFORMITY ..................................................... 13
11. DIAGRAMS ......................................................................................................................... 14
Mare350- -Rev001- - 2 230217 UM en
1. FOREWORD
This symbol means: “Observe operating instructions.” Read these operating
instructions carefully and observe the information contained therein. Keep these
operating instructions handy for future reference.
This manual has been written to comply with the Machinery Directive as amended.
With it, the manufacturer intends to furnish the customer with clear and concise instructions for the
use and maintenance of the machine, as well as information regarding the safety devices with which
it is tted to assure maximum eciency throughout its service life.
The sh slicing machines may be updated; this eventuality shall not prejudice the instructions and
explanations contained in the manual.
Before starting up the sh slicing machine, you must read this manual carefully.
Should this manual be damaged or lost, apply for a copy from the manufacturer immediately.
Many accidents and injuries that occur when using the machine result from insucient familiarity with
its functions and safety devices. Before starting work with the machine, please read the instructions
herein carefully and follow them to the letter.
1.1 Introduction
The sh slicing machines have been designed to comply with applicable safety standards.
Consequently, all our fish slicing machines are fitted with a plate featuring the “CE” mark attesting to
the product's conformity with said provisions.
The housing and the stop blade are made of anodized aluminum. The carriage surface is made of
food-grade plastic. The blade is driven by a V-belt drive motor.
1.2 Intended use
The fish slicing machine is designed for slicing sh with maximum product dimensions of
550 244 35 x x mm (L x W x H). The temperature of the fish to be sliced must not be less than -6 °C.
The slice thickness is continuously adjustable up to 20 mm.
The slicing machine must never be used for cutting meat on the bone, fruits and
vegetables, and non-food products.
Any attempt to slice said products or similar foods may result in severe damage
to the machine and shall cause the warranty to become void.
The machine may only be used in its original condition and with original parts. It is strictly forbidden
to dismantle the safety devices. Should any safety devices be damaged, immediately shut down the
machine and contact ADE for repair or replacement.
Specyfikacje produktu
| Marka: | ADE |
| Kategoria: | maszyna do cięcia |
| Model: | MARE350 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z ADE MARE350, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna do cięcia ADE
25 Września 2024
25 Września 2024
25 Września 2024
15 Września 2024
14 Września 2024
1 Września 2024
26 Sierpnia 2024
19 Sierpnia 2024
17 Sierpnia 2024
6 Sierpnia 2024
Instrukcje maszyna do cięcia
- maszyna do cięcia Riviera And Bar
- maszyna do cięcia Princess
- maszyna do cięcia Backyard Pro
- maszyna do cięcia GOTIE
- maszyna do cięcia Emga
- maszyna do cięcia PowerPlus
- maszyna do cięcia ECG
- maszyna do cięcia Graef
- maszyna do cięcia Kogan
- maszyna do cięcia Camry
- maszyna do cięcia DEDRA
- maszyna do cięcia Güde
- maszyna do cięcia Siemens
- maszyna do cięcia Melissa
- maszyna do cięcia Clatronic
Najnowsze instrukcje dla maszyna do cięcia
27 Marca 2025
27 Marca 2025
18 Lutego 2025
13 Lutego 2025
9 Lutego 2025
8 Lutego 2025
1 Lutego 2025
31 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025