Instrukcja obsługi Amprobe VP-600SB
Amprobe
Niesklasyfikowane
VP-600SB
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Amprobe VP-600SB (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.9 gwiazdek
Strona 1/6
1. Voltage Sensor 2. Probe body 3. Battery Cap
SYMBOLS
Refer to the manual Dangerous Voltage
Double insulated Conforms to relevant
Australian standards.
Underwriters Labora-
tories.[Note: Canadian
and US.]
Do not dispose
of this product as
unsorted municipal
waste.
Complies with EU
directives
Battery
For Use by Competent Persons
Anyone using this instrument should be knowledgeable and trained about the
risks involved with measuring voltage, especially in an industrial setting, and the
importance of taking safet y precautions and of testing the instrument before and
after using it to ensure that it is in good working condition.
SAFETY INFORMATION
WARNING: Use extreme caution when testi ng live electrical cir cuits due to risk
of injury from electrical shock.
Warnings and Precautions
Do not exceed t he maximum overload limits (see specifications) nor the limits •
marked on the instrument it self. Never apply more than 600 V ac rms.
Observe the proper safety precautions when working with voltages above 30 •
VAC rms to avoid electrical shock hazard.
Before and after hazardous voltage measurements, test the detector on a •
known source such as line voltage to determine proper operation.
Never ground yourself when taking measurements. Do not touch exposed •
circuit elements.
Do not operate the instrument in an explosive atmosphere.•
Do not expose this product to rain or moisture. This increases the risk of fire •
or electric shock.
Do not rely on this tester for detecting AC voltage on a shielded wire.•
Comply with local and national safety requirements.•
Use proper protective equipment as required by local or national authorities.•
INTRODUCTION
VP-600SB is an instrument for safely checking the presence of an AC volt age
without making any disconnections in cables, wall sockets, fuses, circuit breakers,
junction boxes, et c. No current flow is needed for correct operation. When
voltage is detected, the tip will illuminate, and t he unit will also beep and vibrate.
OPERATION
Apply the plastic tip t o any connection point or move it along an insulated cable.
When an AC voltage is det ected, the red indicator in the plastic tip will illuminate.
A steady glow (not flash), sound and vibration indicates that voltage is present. If
there is no indication, voltage could still be present. Operation may be affected
by differences in socket design and thickness and type of insulation.
Caution: If three phase equipment is being checked and one phase is open,
the voltage is conducted back to the defective fuse through the other fuses and
will give a faulty indication.
MAINTENANCE AND REPAIR
If there appears to be a malfunction during the operation of the probe, the
following steps should be performed in order to isolat e the cause of the problem:
Check the battery. 1.
Review the operating instructions for possible mistakes in operating 2.
procedure.
Except for the replacement of t he batteries, repair of the voltage detector should
be performed only by a Factory Authorized Service Center or by other qualified
instrument service personnel. The front panel and case can be cleaned with a mild
solution of detergent and water. Apply sparingly with a soft cloth and allow to
dry completely before using. Do not use aromatic hydrocarbons or chlorinated
solvents for cleaning.
Battery Replacement
Use flat blade screwdriver to remove the cap. Remove batteries and replace with
(2) AAA 1.5 volts alkaline batteries. Replace the cap.
SPECIFICATIONS
Operating voltage: 100-600 VAC
Operating Temperature: 5°C to +40°C (41°F to 104 °F); < 90% RH
Environment: < 2000m, indoor operation
Power: (2) AAA batteries 1.5 volts alkaline.
Dimensions: 132 x 28 x 23mm (5.2 x 1.1 x 0.9")
Weight: 49 gr(1.7 oz)
EMC: EN 61326-1:2006
Sensitivity: illuminates red, vibrates and beeps at 4mm (0.16") distance f rom a
wire carrying 120 VAC.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Your Amprobe product will be f ree f rom defects in material and workmanship for
1 year from the date of purchase. This warranty does not cover fuses, disposable
batteries or damage from accident, neglect, misuse, alteration, contamination,
or abnormal conditions of operation or handling. Amprobe’s warranty obligation
is limited, at Amprobe’s option, to refund of the purchase price, free of charge
repair, or replacement of a defective product . Resellers are not authorized to
extend any other warranty on Amprobe’s behalf. To obt ain service during the
warranty period, return the product with proof of purchase to an authorized
Amprobe Test Tools Service Center or t o an Amprobe dealer or distributor. See
Repair Section for details. This warranty is your only remedy . All other warranties
- whether express, implied or stat utory - including implied warranties of fit ness
for a particular purpose or merchantability, are hereby excluded. Neither
Amprobe nor its parent company or af filiates shall be liable for any special,
indirect, incidental or consequential damages or losses, arising from any cause or
theory. Since some stat es or countries do not allow the exclusion or limitation of
an implied warranty or of incidental or consequential damages, this limit ation of
liability may not apply to you.
Repair
All test tools returned for warranty or non-warranty repair or for calibration
should be accompanied by the following: your name, company’s name, address,
telephone number, and proof of purchase. Additionally, please include a brief
description of the problem or the service requested and include the test leads
with the meter. Non-warranty repair or replacement charges should be remitted
in the form of a check, a money order, credit card with expiration date, or a
purchase order made payable to Amprobe® Test Tools.
In-Warranty Repairs and Replacement – Al l Countries
Please read the warranty statement and check your battery before requesting
repair. During the warranty period any defective test tool can be returned to your
Amprobe® Test Tools distributor for an exchange for the same or like product.
Please check the “Where to Buy” section on www.amprobe.com for a list of
distributors near you. Additionally, in the United States and Canada In-Warranty
repair and replacement units can also be sent to a Amprobe® Test Tools Service
Center (see below for address).
Non-Warranty Repairs and Replacement – US and Canada
Non-warranty repairs in the United St ates and Canada should be sent to a
Amprobe® Test Tools Service Center. Call Amprobe® Test Tools or inquire at your
point of purchase for current repair and replacement rates.
In USA In Canada
Amprobe Test Tools Amprobe Test Tools
Everett, WA 98203 Mississauga, ON L4Z 1X9
Tel: 888-993-5853 Tel: 905-890-7600
Fax: 425-446-6390 Fax: 905-890-6866
Non-Warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Amprobe® Test Tools
distributor for a nominal charge. Please check the “Where to Buy” section on
www.amprobe.com for a list of distributors near you.
European Correspondence Address*
Amprobe® Test Tools Europe
Beha-Amprobe GmbH
In den Engemat ten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 – 0
*(Correspondence only – no repair or replacement available from this address.
European customers please contact your distributor.)
VP-600SB
Non-Contact Volt Probe
VoltProbe
CATIII 600V 100-600VAC
1
23
Specyfikacje produktu
| Marka: | Amprobe |
| Kategoria: | Niesklasyfikowane |
| Model: | VP-600SB |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Amprobe VP-600SB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Amprobe
3 Października 2024
30 Września 2024
29 Września 2024
27 Września 2024
23 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024
13 Września 2024
13 Września 2024
Instrukcje Niesklasyfikowane
- IBEAM
- Aquael
- Ventev
- Anker
- Qualcast
- DJI
- Tetra
- X-Sense
- Ninja
- Eligent
- GFI System
- Scotsman
- HeartSine
- Maktec
- HyperX
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025