Instrukcja obsługi Rock N Roller R6RT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rock N Roller R6RT (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 34 osób i została oceniona przez 2 użytkowników na średnio 4.0 gwiazdek

R6RT Model Specifications

Your RocknRoller Multi-Cart shipping box should

contain a frame and the following parts:

Recommended Tools For Assembly

Length (Compact) 28” 2 x½” at washers

Length (Extended) 2 x½” lock nuts42.5”

Channel Lock Pliers

(not included)

Width (Frame Bed) 1 x 1” (25 mm) square plastic endplugs12.5”

Width (Rear Wheels) 18”1 x¾” (20 mm) square plastic endplugs

Height (Folded) 2 x” x 1 ¼” cotter pins9.5”1/8

Height (Unfolded) 2 x20 mm at washer33.25”

Front Casters 4” x 1”2 x8”x 2” (200 mm x 64 mm) rear wheels

Rear Wheels 8” x 2.5”2 x4”x 1” (100 mm x 25 mm) stem casters

Weight 22 lbs.1 xFlat Wrench

Load Capacity 500 lbs.1 xAssembly/instruction sheet

1. Installing Rear Wheels

Gently slide wheel over axle as shown.

Do not force wheels onto axle. It is

recommended to lubricate axles with light

grease before installing. Install cotter pins

and bend ends outward.

2. Installing Front Swivel Casters

Attach front swivel casters as shown. While tightening lock nuts, grip

bearing cap with channel lock pliers or pipe wrench to prevent threaded

stem from turning. Tighten lock nuts rmly, but not excessively tight.

Check lock nut tightness on caster stems periodically.

Specyfikacje produktu