Instrukcja obsługi Anton/Bauer QRC-gold

Anton/Bauer nieskategoryzowany QRC-gold

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Anton/Bauer QRC-gold (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.7 gwiazdek

Pobierz PDF

Strona 1/2

Anton/Bauer Inc., 14 Progress Drive, Shelton, Connecticut 06484 USA • (203) 929-1100 • Fax (203) 925-4988 • support@antonbauer.com

Europe, B.V. Eurode Business Center, Eurode-Park 1-2, 6461 KB Kerkrade, The Netherlands • (+31) 45 5639220 • Fax (+31) 45 5639222 • eurosupport@antonbauer.com

Singapore Office - Anton/Bauer, 6 New Industrial Road, # 02-02 Hoe Huat Ind. Bld., Singapore 536199 • (+65) 62975784 • Fax (+65) 62825235

www.antonbauer.com 7595-0282 Rev E

QRC GOLD

Installation Instructions

A7595-0282 Rev E

DA-E751 Sht 1 of 2

FEATURES

CAUTION: Open + and – wires inside bracket. DO NOT attach battery without terminating wires.

1. Cam action latch for improved ease of battery loading and removal. Red label below latch indicates battery is not fully

latched, eliminating inadvertent battery unloading.

2. PowerTap® Connector. A built-in fused 10 amp connector for powering Ultralight® portable camera light and

accessories. NOTE: Requires PowerTap connector. The PowerTap connector is included on all Ultralight 2 light

assemblies and cable assemblies for the older Ultralight SINGLE or DUAL.

3. Mounting Pattern. The Snap-On Gold Mount bracket is fully compatible with all existing cameras and batteries using

the Anton/Bauer mounting system. NOTE: When custom mounting the Gold Mount bracket system it is necessary to

support the shaded areas (see Fig. A) against a flat surface. A backplate is provided with each Gold Mount bracket for

this purpose.

4. PowerTap Fuse Holder. The fuse holder for the PowerTap connector. The fuse holder located in the bracket is press

fit. To remove the fuse holder,

ras

the main fuse holder bod

and

ull u









Compact universal Gold Mount® kit with mounting hardware and wire terminals, most DC powered professional video

equipment utilize specific Gold Mount models (see Anton/Bauer catalog’s Gold Mount section and Product Application Guide).

The QRC-Gold is ideal for adapting video devices where no other Gold Mount is specified. Before adapting the QRC-Gold to

any video device for the first time, check to confirm compatibility with an Anton/Bauer 14.4 volt battery.

Approved Copy

Specyfikacje produktu

Marka:	Anton/Bauer
Kategoria:	nieskategoryzowany
Model:	QRC-gold
Kolor produktu:	Czarny
Wysokość produktu:	119.4 mm
Szerokość produktu:	76.2 mm
Głębokość produktu:	12.7 mm