Instrukcja obsługi ATen UC1284B
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ATen UC1284B (2 stron) w kategorii Kable do komputerów PC i urządzeń peryferyjnych. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.1 gwiazdek
Strona 1/2
- 4 -- 3 -- 2 -
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction manual, may cause
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that
which the receiver is connected;
Consult the dealer or an experienced radio/television technician for help.
This product is RoHS compliant.
Read this guide thoroughly and follow the installation and
operation procedures carefully in order to prevent any damage
to the units and/or any devices that connect to them.
This package contains:
1 UC1284B USB-Parallel Printer Cable
1 User Instructions
If anything is damaged or missing, contact your dealer.
Copyright © 2003–2011 ATEN ® International Co., Ltd.
Manual Part No. PAPE-1127-501G
Printing Date: 12/2011
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd.
All rights reserved. All other trademarks are the property of their respective owners.
The USB-Parallel Printer Cable allows PCs, notebooks, laptops,
and handheld computing devices that support the USB
specification to print to any parallel printer via the USB with up to
12 Mbps throughput - which is much faster than standard parallel
port speeds. The cable provides true plug-n-play and hot
plugging capability - in which the cable’s presence is
automatically detected by Windows.
For further convenience - especially to users of notebooks,
laptops, and handhelds - the cable derives its operating power
from the Universal Serial Bus itself, so no bulky external power
supply needs to be taken along. And because it is a USB
Specification compliant device, the cable supports
energy-saving suspend and resume operations.
Windows: 2000/XP/Vista/7
USB Host Controller installed on the system
Note: For Windows 98 and ME, please download the drivers
from our website: www.aten.com.
Low power consumption; powered by USB connection
Fully automatic high speed bi-directional communication
over parallel port
Allows current Microsoft Windows printer drivers to print
seamlessly to USB
Plug & Play
IEEE-1284 (bi-directional parallel interface) specification
compliance
Native Windows 2000, XP, Vista, and 7 support
No IRQ required
There is no need to install drivers for Windows 2000/XP/Vista/7.
Do the following steps to install the driver on Windows 98 and
ME.
1. With your computer booted up, plug the UC-1284B into the
computer’s USB port; its presence is automatically detected,
and the New Hardware Wizard appears; click on Next to
continue.
2. In the dialog box that comes up choose Search for the best
drivers for your device; Click on Next to continue.
3. In the dialog box that comes up, choose the drive as your
source; insert the driver you download from the website;
Click on Next to continue. The driver file is now copied to
your hard disk.
4. After the driver file has been copied to the hard disk, a dialog
box appears to tell you that the installation has finished. Click
on Finish. Windows now finishes up the installation.
Specyfikacje produktu
| Marka: | ATen |
| Kategoria: | Kable do komputerów PC i urządzeń peryferyjnych |
| Model: | UC1284B |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z ATen UC1284B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Kable do komputerów PC i urządzeń peryferyjnych ATen
1 Stycznia 2025
22 Września 2024
22 Września 2024
22 Września 2024
21 Września 2024
20 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024
Instrukcje Kable do komputerów PC i urządzeń peryferyjnych
- Vision
- Laserliner
- Digitus
- Avenview
- Ewent
- ACV
- SIIG
- On-Q
- Intenso
- Pyramid
- CyberPower
- NZXT
- Kicker
- Klein Tools
- Raidsonic
Najnowsze instrukcje dla Kable do komputerów PC i urządzeń peryferyjnych
29 Stycznia 2025
12 Stycznia 2025
10 Stycznia 2025
4 Stycznia 2025
2 Stycznia 2025
2 Stycznia 2025
2 Stycznia 2025
2 Stycznia 2025
30 Grudnia 2025
29 Grudnia 2024