Instrukcja obsługi Atlas Sound AP-15
Atlas Sound
głośnik
AP-15
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Atlas Sound AP-15 (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.8 gwiazdek
Strona 1/2
AtlasSound.com 1/2
AP-15/AP-15T(C)
Omni-Purpose® 15 Watt Horn Loudspeakers
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2010 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003852 RevA 5/10
Specifications
Models AP-15, AP-15T(C)
Power Rating 15 Watts Continuous
Frequency Response 400 - 14,000 Hz (Nominal)
500 Hz - 6000 Hz (±5dB)
Sensitivity 120dB at 15 Watts (Peak)
116dB at 15 Watts/1 Meter (Avg) 500 - 6000 Hz
106dB at 1 Watt/1 Meter (Avg) 500 - 6000 Hz
Dispersion Angle 70˚ (-6dB, 2000 Hz Octave Band)
Weight AP-15: 3.5 lbs (1.6kgs)
AP-15T: 4 lbs (1.8kgs)
Finish Baked Epoxy
Dimensions H 83⁄4" x W 77⁄8" x D 95⁄ "16
Temperature Range -40˚C - 70˚C
Architect and Engineer Specifications
Loudspeakers shall be Atlas Sound Model __________ (AP-15, AP-15C,
AP-15T, AP-15TC) or approved equal. Each loudspeaker unit shall be
supplied with integral compression driver and shall be constructed of
structural aluminum and ABS plastic with double re-entrant acoustic path
and exponentially-flared square bell. The weather-resistant unit shall have
a continuous audio power rating of 15 watts. Frequency response range
shall be 400-14,000 Hz (Nominal), 500-6000 Hz (+5dB). Sound pressure
level shall be 116dB (15W/1M), 106dB (1W/1M). Sound dispersion shall
be 70 degrees (-6dB, 2000 Hz octave band). Mounting bracket shall allow
vertical and horizontal adjustment and include provisions for surface
mounting, banding or strapping. Loudspeaker shall have impedance
selection, via seven-position switch of 5000, 2500, 1300, 666, 333, 89
and 45 ohms. Power taps shall be available at .48, .94, 1.8, 7.5, and
15 watts for 25V line, 1, 2, 3.8, 7.5, and 15 watts for 70.7V line and 2,
4, 8 and 15 watts for 100V line. Wiring terminals shall be enclosed for
security and weather protection. Finish shall be grey or beige (C) baked
epoxy as indicated. Dimensions shall be H 83⁄4" x W 77⁄8" x D 95⁄ ".16
Features
UÊ -Õ«iÀÀÊÌi}LÌÞÊvÀÊ6ViÊ>`Ê/iÊ-}>}
UÊ }vvViVÞÊÀÛiÀÊÜÌÊ*ÀÛiÊ*iÀvÀ>ViÊ,i>LÌÞ
UÊ /À>ÃvÀiÀÊ/®ÊµÕ««i`Ê6iÀÃÊvÀÊ6iÀÃ>ÌiÊÓx]ÊÇä°Ç]ÊÀÊ£ää6Ê
Line Applications
UÊ "*ÕÀ«Ãi
® Bracket for Precise Positioning
UÊ ÛÀiÌÊ,iÃÃÌ>ÌÊvÀÊ"ÕÌ`ÀÊ>`Ê`ÀÊ1Ãi
UÊ 1°-°Ê/À>`i>ÀÊiÃ}ÊÃÊ7À`Ê,iV}âi`ÊvÀÊ+Õ>ÌÞÊ>`Êi«i`>LÌÞ
UÊ Û>>LiÊÊÀiÞÊÀÊi}iÊ®ÊÃ
Applications
AP-15 and AP-15T environment-resistant loudspeakers are the world
standard for high-intelligibility voice and signal transmission in medium-
power indoor and outdoor public address, intercom, security and
industrial-signal-system applications. Cost effective, 15-watt units
incorporate high-efficiency compression drivers to project sound over
long distances or wide areas with fewer loudspeakers. The AP-15 Series
is recognized throughout the world as “the performance standard” for
ViÀV>ÊÃÕ`]ÊÌiÀVÊ>`Ê«ÀÌiVÌÛiÃ}>}ÊÃÞÃÌiðÊ1ÌÃÊ
are commonly installed in commercial buildings, distribution centers,
factories, schools, public access areas, civic centers and recreational
facilities.
Description
The 8 Ohm Model AP-15 and the transformer-equipped Model AP-15T
are double re-entrant loudspeakers which deliver 15 Watts of continuous
power handling, superior intelligibility and unparalleled efficiency. The
AP-15 Series operates within a nominal frequency response range of
400-14,000 Hz and offers a sensitivity of 120dB at rated power to provide
clear voice and signal communication.
Transformer-equipped Model AP-15T includes a versatile, 3-way, 25, 70.7,
100V line transformer to meet a variety of distributed system needs. The
transformer is adjustable using Atlas Sound’s exclusive Vari-Tap
® Connect
Center which features a 7-position, watts/impedance selection switch.
The labor-saving Vari-Tap® switch is screwdriver adjustable and includes a
protective cover with built-in cable strain relief.
The trademarked squared-bell design signifies Atlas Sound quality and
reliability. The Omni-Purpose® mounting bracket (supplied on all models)
achieves precise positioning in the vertical and horizontal planes with a
single adjustment and includes provisions for loudspeaker installation
ÊVÛiÌ>ÊÃÕÀv>ViÃÊ>ÃÊÜiÊ>ÃÊvÀÊÃÌÀ>«ÕÌ}ÊÊLi>ÃÊÀÊ
«>ÀðÊ*Ê-iÀiÃÊÕ`ëi>iÀÃÊ>ÀiÊ1°-°Ê>`iÊÌÊ>ÃÃÕÀiÊÃÕ«iÀÀÊÃiÀÛViÊ
reliability. Weather-resistant construction is metal and matching ABS
plastic with metal components finished in grey epoxy (standard) or beige
epoxy (Model AP-15TC).
The AP-15 Series also includes a 45-ohm Model AP-15-45 and a 4 ohm
Model AP-15-4 which are designed respectively for intercom and
CB/auxiliary radio applications. (See SL2-1567).
Accessories
BX-2A Vandal resistant cover plate for armored cable
and conduit connection. Constructed of cast
aluminum.
AP-15 Series
AtlasSound.com 2/2
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2010 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003852 RevA 5/10
AP-15(T) Frequency Response
AP-15 (Impedance Sweep)
IÊÊ ÌÊ1Ãi
AP-15(T) (Harmonic Distortion - 1.5 watts @ 1 meter)
Polars Are Normalized To Zero On Axis
Atlas Sound products are designed and tested in our well-equipped research laboratory which contains a fully anechoic chamber, complete
analog Bruel & Kjaer measurement equipment and Techron® TEF 20® audio analyzer. Atlas Sound is proud to be a beta site for TEF software.
15 watts @1 meter
1 watt @ 1 meter
MAGNITUDE (dB)
Frequency (Hz)
Fundamental
2nd Harmonic
3rd Harmonic
MAGNITUDE (dB)
Frequency (Hz)
Impedance Amplitude
OHMS
Frequency (Hz)
DRIVER PROTECTION: The horn loudspeaker should not be operated at
vÀiµÕiViÃÊÕÌÃ`iÊÌiÊëiVvi`ÊÀ>}i]ÊiëiV>ÞÊLiÜÊÀÊVÕÌvv°ÊÌÊÃÊ
suggested that any program material be high-passed at 300 Hz with a 6dB per
octave filter. This can be done by a low level filter at the amplifier input or by
a series capacitor at each loudspeaker. Electrolytic capacitors can be used but
they must be non- (See Typical Capacitor Values Chart).polarized
9/32" Dia.
3 Holes 120°
Apart, On 2.312
Bolt Circle
1-3/4"
2"
1/2" Banding Slot
2-7/8" Dia.
Frequency
(Hz)
+Di Beamwidth
(Degrees)
1000 5.15 7.12 115
2000 13.90 11.43 70
4000 32.20 15.08 40
8000 39.90 16.01 30
Typical Capacitor Values
8 Ohm Driver 25 Volt Line 70 Volt Line 100 Volt Line
70 mfd 15 mfd 2 mfd 1 mfd
AP-15T Vari-Tap® Control Connect Center Xfmr. Power Taps
Switch
Position
«i`>Vi
(Ohms)
Watts
@ 25V
Watts
@ 70.7V
Watts
@ 100V
1 5000 – 1 2
2 2500 – 2 4
3 1300 .48 3.8 8
4 666 .94 7.5 15
5 333 1.8 15 X*
6 89 7.5 X* X*
7 45 15 X* X*
Mounting FlangeDimensionsBell
Dimensions
Specyfikacje produktu
| Marka: | Atlas Sound |
| Kategoria: | głośnik |
| Model: | AP-15 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Atlas Sound AP-15, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje głośnik Atlas Sound
28 Grudnia 2024
23 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
Instrukcje głośnik
- głośnik WyreStorm
- głośnik Sitecom
- głośnik Sirus
- głośnik DCM
- głośnik ATC
- głośnik Prixton
- głośnik NEAR
- głośnik Elipson
- głośnik Niles
- głośnik Avante
- głośnik TM Electron
- głośnik Metra
- głośnik Thiel
- głośnik Thomson
- głośnik Atlantic
Najnowsze instrukcje dla głośnik
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025