Instrukcja obsługi Baby Lock BL500A Jane

Baby Lock maszyna do szycia BL500A Jane

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Baby Lock BL500A Jane (52 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 11 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/52

“SAVE THESE INSTRUCTIONS”

“This sewing machine is intended for household use.”

DANGER – To reduce the risk of electric shock:

●The sewing machine should never be left unattended while plugged in. Always unplug the sewing machine from the electrical outlet immediately after using and before

cleaning.

●Always unplug before changing the light bulb. Replace bulb with same type rated 120V 15 watts for 120V model or rated 240V 15 watts for 220-240V model.

WARNING – To reduce the risk of burns, fire, electric shock, or injury:

●Do not allow this sewing machine to be used as a toy. Close attention is necessary when the sewing machine is used by or near children.

●Use this sewing machine only for its intended use as described in this manual. Use only accessories recommended by the manufacturer as contained in this manual.

●Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the

sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment.

●Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot control free from the accumulation of lint,

dust, and loose cloth.

●Never drop or insert any object into any opening.

●Do not use outdoors.

●Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

●To disconnect, turn the main switch to the symbol “O” position which represents off, then remove plug from outlet.

●Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

●Keep fingers away from all moving parts. Special care is required around the sewing machine needle.

●Always use the proper needle plate. The wrong plate can cause the needle to break.

●Do not use bent needles.

●Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

●Turn off power to the machine by flipping the ON/OFF switch to the symbol “O” before making any adjustments in the needle area, such as threading the needle,

changing the needle, threading the bobbin or changing the presser foot etc.

●Always unplug the sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the

instruction manual.

●This sewing machine is not intended for use by young children or infirm persons without supervision.

●Young children should be supervised to ensure that they do not play with this sewing machine.