Instrukcja obsługi Barox PC-INJ-60W-B
Barox
Karta sieciowa/adapter
PC-INJ-60W-B
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Barox PC-INJ-60W-B (7 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 28 osób i została oceniona przez 14.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/7
User Manual -INJ- -B Voltage Boosted Series: PC 30
Version 1.2019
Page /2 7
NOTE
Always make sure the total length of the TX cable DOES NOT exceed 100meter. Total length
is defined as length A + length B
Length A + Length B < 100 meters
POE signal attenuates every meter, the built-in transformer allows the attenuation to reach 100
meters to follow IEEE802.3af/at standards. The higher quality PD you connect to, the more
reliable the network will be. When connecting to a poor-quality PD, it cannot generate strong a
enough signal for the remote switch. Always make sure you have a high-quality PD to perform
your desired network.
Introduction
This rugged designed industrial PoE injector is equipped with a 30W PSE Port. The Injector
can be powered by -56 VDC input voltage. With its multi-purpose design, it can also be Din-24
Rail or wall-mounted. It is an ideal unit for Mobile Base Station (BTS), IP surveillance, traffic
monitoring and security applications in critical environments. It can tolerate -40°C to 75°C in
harsh environments to perform a reliable network. This product has been rigorously tested in
harsh environments for your security, transportation, and telco applications.
PD
Remote Switch
A
B
Page /3 7
Installation package
This unit can be din-rail mounted or wall-mounted. Din-rail brackets and wall-mounted brackets
are included.
Power connection
This unit provides a 4 pin terminal block. It can be operated using -56VDC power source. 24
Always make sure your input voltage is within this supported voltage range.
To connect power: This unit supports two power inputs. Follow the printed polarity for +V1-,
+V2- and ground. Connect positive wires to V+, connect negative wires to V-, and connect a
neutral wire to the ground screw.
+V1- is for power input one connection.
+V2- is for power input two connection.
Power connecting procedure:
STEP 1 – Take out 4 pin terminal block located in the
included mounting kit package.
STEP 2 – Connect power wires to +V1- or +V2- with
corresponding polarity. Connect the grounding wire to
the ground screw.
STEP 3 – Plug into terminal block socket shown
above. Polarity needs to match V+ and V-.
WARNING Always SHUT OFF power source to --
connect power wire.
WARNING Any exceeded input voltage will not make this unit function and may --
damage this unit.
Wall mount
bracket x 2
4 pin Terminal Block x1
Philips Head Screw x 4
Din Rail Bracket x 1
+V1- +V2-
Specyfikacje produktu
| Marka: | Barox |
| Kategoria: | Karta sieciowa/adapter |
| Model: | PC-INJ-60W-B |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Barox PC-INJ-60W-B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Karta sieciowa/adapter Barox
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
Instrukcje Karta sieciowa/adapter
- Karta sieciowa/adapter Mede8er
- Karta sieciowa/adapter Vivotek
- Karta sieciowa/adapter Antec
- Karta sieciowa/adapter Mach Power
- Karta sieciowa/adapter AVM
- Karta sieciowa/adapter EQ3
- Karta sieciowa/adapter Speed-Link
- Karta sieciowa/adapter Klipsch
- Karta sieciowa/adapter Sitecom
- Karta sieciowa/adapter Vigitron
- Karta sieciowa/adapter Velleman
- Karta sieciowa/adapter Suunto
- Karta sieciowa/adapter Tycon Systems
- Karta sieciowa/adapter Iconbit
- Karta sieciowa/adapter Russound
Najnowsze instrukcje dla Karta sieciowa/adapter
8 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
29 Marca 2025
14 Marca 2025
14 Marca 2025