Instrukcja obsługi Behringer Rhythm Designer RD-9

Behringer Niesklasyfikowane Rhythm Designer RD-9

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Behringer Rhythm Designer RD-9 (38 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 3.8 gwiazdek

Pobierz PDF

Strona 1/38

User Manual

RHYTHM DESIGNER RD-9

Classic Analog/Digital Drum Machine with 11 Drum Sounds,

64-Step Sequencer, Wave Designer and Dual-Mode Filter

V 1.0

2RHYTHM DESIGNER RD-9 User Manual

Thank you

Thank you very much for expressing your condence in Behringer by purchasing

the RD-9 Rhythm Designer with 11 original drum sounds, 64-step sequencer,

integrated Wave Designer, integrated dual-mode lter, 10 independent analog

outputs plus a mono mix, 16 authentic step pads, 16 pattern changes per song

and an easily readable 7-segment 4-character LED display for tempo.

Table of Contents

Thank you ....................................................................... 2

Important Safety Instructions ...................................... 3

Legal Disclaimer ............................................................. 3

Limited warranty ............................................................3

1. Introduction 5 ...............................................................

1.1 Before you get started 5 ......................................................

1.1.1 Initial operation 5 ..............................................................

1.2 The product manual 5 ..........................................................

1.3 Preparation ........................................................................... 5

2. Features ...................................................................... 5

3. Front and Rear Panel

Control Layout 6 ...........................................................

3.1 Top Controls 6 ..........................................................................

3.1.1 Volume Section .............................................................. 6

3.1.2 Analog Filter Section .................................................. 6

3.1.3 Wave Designer 6 ...............................................................

3.1.4 Edit Section 7 .....................................................................

3.1.5 Mode Section 7 .................................................................

3.1.6 Sync Section 7 ...................................................................

3.1.7 Playback Controls.......................................................... 7

3.1.8 Auto Scroll Section 7 .......................................................

3.1.9 Step & Note Repeat Section 7 ......................................

3.1.10 Track Control and Settings 8 ......................................

3.1.11 Voice Control 8 .................................................................

3.2 Rear Panel connections .................................................... 9

4. Overview ..................................................................10

4.1 Connections ....................................................................... 10

4.2 Software Setup .................................................................. 10

4.3 Hardware Setup ................................................................ 10

4.4 Voice Section ...................................................................... 10

5. Creating a Pattern (Step Mode) .............................. 11

6. Playing a Pattern (Pattern Mode) ........................... 13

7. Creating a Song (Pattern Chaining Mode) ............ 13

8. Creating a Song Chain

(Song Mode) ............................................................. 14

9. Wave Designer ......................................................... 15

10. Analog Filter........................................................... 15

11. Settings ................................................................... 16

11.1 MIDI ...................................................................................... 16

11.2 11.2 USB .............................................................................. 16

11.3 CLOCK ................................................................................. 16

11.4 MAP ...................................................................................... 17

11.5 PREFS ................................................................................... 17

11.6 FILTER .................................................................................. 18

11.7 POLY (Polymetric) .......................................................... 18

11.8 RAND (Random) .............................................................. 18

11.9 PROB (Probability) ......................................................... 18

11.10 FLAM .................................................................................. 19

11.11 RPT (Note repeat) .......................................................... 19

11.12 Step Size Preference.................................................... 19

11.13 SYNC .................................................................................. 19

11.14 DATA MODE ....................................................................20

12. Software Updates 20 .................................................

13. Parameters ............................................................. 21

14. DAW Control ........................................................... 29

15. RD-9 Set-up Example ............................................ 30

16. Specications .........................................................33

17. Glossary ..................................................................35

3RHYTHM DESIGNER RD-9 User Manual

Important Safety

Instructions

LEGAL DISCLAIMER

LIMITED WARRANTY

Terminals marked with this symbol carry

electrical current of sucient magnitude

to constitute risk of electric shock.

Use only high-quality professional speaker cables with

¼" TS or twist-locking plugs pre-installed. Allother

installation or modication should be performed only

by qualiedpersonnel.

This symbol, wherever it appears,

alertsyou to the presence of uninsulated

dangerous voltage inside the

enclosure-voltage that may be sucient to constitute a

risk ofshock.

This symbol, wherever it appears,

alertsyou to important operating and

maintenance instructions in the

accompanying literature. Please read the manual.

Caution

To reduce the risk of electric shock, donot

remove the top cover (or the rear section).

No user serviceable parts inside. Refer servicing to

qualied personnel.

Caution

To reduce the risk of re or electric shock,

do not expose this appliance to rain and

moisture. The apparatus shall not be exposed to dripping

or splashing liquids and no objects lled with liquids,

suchas vases, shall be placed on the apparatus.

Caution

These service instructions are for use

by qualied service personnel only.

Toreduce the risk of electric shock do not perform any

servicing other than that contained in the operation

instructions. Repairs have to be performed by qualied

servicepersonnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding-type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. Ifthe

provided plug does not t into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Use only attachments/accessories specied by

themanufacturer.

12. Use only with the

cart, stand, tripod, bracket,

or table specied by the

manufacturer, orsold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus

combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power supply cord or plug

is damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed

to rain or moisture, does not operate normally, or has

beendropped.

15. The apparatus shall be connected to a MAINS socket

outlet with a protective earthing connection.

16. Where the MAINS plug or an appliance coupler is

used as the disconnect device, the disconnect device shall

remain readily operable.

17. Correct disposal of this

product: This symbol indicates

that this product must not be

disposed of with household

waste, according to the WEEE

Directive (2012/19/EU) and

your national law. This product

should be taken to a collection center licensed for the

recycling of waste electrical and electronic equipment

(EEE). The mishandling of this type of waste could have

a possible negative impact on the environment and

human health due to potentially hazardous substances

that are generally associated with EEE. At the same time,

your cooperation in the correct disposal of this product

will contribute to the ecient use of natural resources.

For more information about where you can take your

waste equipment for recycling, please contact your local

city oce, or your household waste collection service.

18. Do not install in a conned space, such as a book

case or similar unit.

19. Do not place naked ame sources, such as lighted

candles, on the apparatus.

20. Please keep the environmental aspects of battery

disposal in mind. Batteries must be disposed-of at a

battery collection point.

21.

This apparatus may be used in tropical and moderate

climates up to 45°C.

Music Tribe accepts no liability for any loss which may

be suered by any person who relies either wholly or in

part upon any description, photograph, or statement

contained herein. Technical specications, appearances

and other information are subject to change without

notice. All trademarks are the property of their

respective owners. Midas, Klark Teknik, Lab Gruppen,

Lake, Tannoy, Turbosound, TC Electronic, TC Helicon,

Behringer, Bugera, Oberheim, Auratone, Aston

Microphones and Coolaudio are trademarks or registered

For the applicable warranty terms and conditions

and additional information regarding Music Tribe’s

Limited Warranty, please see complete details online at

musictribe.com/warranty.

Specyfikacje produktu

Marka:	Behringer
Kategoria:	Niesklasyfikowane
Model:	Rhythm Designer RD-9

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Behringer Rhythm Designer RD-9, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Behringer

Behringer MC2000 Instrukcja

7 Stycznia 2025

Behringer SM5002 Instrukcja

7 Stycznia 2025

Behringer GB3002-E Instrukcja

7 Stycznia 2025

Behringer LM DRUM Instrukcja

7 Stycznia 2025

Behringer MU1000 Instrukcja

7 Stycznia 2025

Behringer MC1000 Instrukcja

7 Stycznia 2025

Behringer SM5001 Instrukcja

7 Stycznia 2025

Behringer MS2050-L Instrukcja

7 Stycznia 2025

Behringer GLC2-1000 Instrukcja

1 Stycznia 2025

Behringer GLC2-300 Instrukcja

1 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig VB99 SE Instrukcja

29 Stycznia 2025

Rock N Roller R14G Instrukcja

29 Stycznia 2025

Rock N Roller R6RT Instrukcja

29 Stycznia 2025

QSC TSC-8 Instrukcja

29 Stycznia 2025

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025

Sunding SD-581G Instrukcja

29 Stycznia 2025

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025

Shimbol Memory I PRO Instrukcja

29 Stycznia 2025

OSEE TX402 Instrukcja

29 Stycznia 2025