Instrukcja obsługi Black Box AlertWerks EME1TH2
Black Box
nawilżacz powietrza
AlertWerks EME1TH2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black Box AlertWerks EME1TH2 (3 stron) w kategorii nawilżacz powietrza. Ta instrukcja była pomocna dla 51 osób i została oceniona przez 26 użytkowników na średnio 4.3 gwiazdek
Strona 1/3

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
Customer
Support
Information
February 2010
MT1000A-85-R4
Measures temperature from -40 to +167° F
in 1° F increments. Measures 0 to 100% relative
humidity with 1% resolution and accuracy
of ±3% at 77° F.
AlertWerks™ Dual Temperature/Humidity Sensors
EME1TH1-001
EME1TH2-005
EME1TH3-015
To continue, turn this page over…
Humidity:
Communications Cable — RJ-45 jack to humidity sensor
using UTP CAT5 wire
Dual Sensor — Automatically detected by the hub
Measurement Accuracy — ±4.1 at -40° F, minimum ±0.9
at 25° F, ±4 at 167° F
Relative Humidity — 0 to 100%
Resolution — 1% for the hubs and 0.1% for the base units
Sensor Element — Can get wet without damage
Power — Powered by the hub (no additional power needed);
Power consumption: Typical 7.25 mWatt, 1.45 mA
Specifications
Temperature:
Communications Cable — RJ-45 jack to temperature sensor
using UTP CAT5 wire
Measurement Accuracy — Maximum ±4.1 at -40° F,
minimum ±0.9 at 68° F and ±4 at +167° F (Maximum ±2.3
at -40° C, minimum ±0.4 at 25° C and ±1.7 at +75° C)
NOTE: The Temperature/Humidity Sensors never need
calibration.
Measurement Range — -40 to +167° F (-40 to +75° C)
Measurement Rate — One reading every second
Measurement Resolution — 1° F (1° C) when used with the
EME102A and EME108A; 0.9° F (0.5° C) when used with
the EME134A
Sensor Type — Semiconductor microprocessor controlled
Power — Powered by the hub (no additional power needed);
Power consumption: Typical 10.70 mWatt, 2.14 mA
Specyfikacje produktu
| Marka: | Black Box |
| Kategoria: | nawilżacz powietrza |
| Model: | AlertWerks EME1TH2 |
| Wbudowany wyświetlacz: | Nie |
| Długość kabla: | 1.5 m |
| Technologia łączności: | Przewodowa |
| Przeznaczenie: | Wewnętrzna |
| Model: | Wolnostojący |
| Dokładność: | 0.2 °C |
| Standardowe interfejsy: | RJ-45 |
| Zakres pomiaru temperatury: | -40 - 75 °C |
| Cechy zabiezpieczeń: | Wodoodporny |
| Zakres pomiaru wilgotności: | 0 - 100 % |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Black Box AlertWerks EME1TH2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nawilżacz powietrza Black Box
27 Maja 2024
12 Maja 2024
Instrukcje nawilżacz powietrza
- Ausclimate
- Toyotomi
- Ionmax
- Ravanson
- Sencor
- Crestron
- Trotec
- Deerma
- Challenge
- Gorenje
- Danby
- Homematic IP
- Eldom
- Anslut
- Mybeo
Najnowsze instrukcje dla nawilżacz powietrza
21 Października 2024
25 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024