Instrukcja obsługi Black Box BDS-8THA-1

Black Box nawilżacz powietrza BDS-8THA-1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black Box BDS-8THA-1 (12 stron) w kategorii nawilżacz powietrza. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/12

24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM

BDS

TEMPERATURE

KIOSK

QUICK START GUIDE

BDS-8W(-1), BDS-8THA(-1), BDS-8FHA(-1)

TABLE OF CONTENTS

NE E D HELP ?

LE AVE THE TEC H TO U S

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1.877.877.2269 BL ACKBOX .COM

CONTENTS

STEP 1. CONNECT THE GATE ........................................................................................................................................................................ 3

STEP 2: REVIEW THE PORTS DEFINITION ................................................................................................................................................... 3

2.1 WIRE INTERFACE DEFINITION VERSION 1.......................................................................................................................................................3

2.2 WIRE INTERFACE DEFINITION VERSION 2 ......................................................................................................................................................4

STEP 3. APP INSTRUCTIONS ......................................................................................................................................................................... 5

3.1 ENTER THE SETTING INTERFACE ......................................................................................................................................................................5

3.2 APPLICATION SETTINGS .....................................................................................................................................................................................6

3.3 FACE IMAGE ACQUISITION ..................................................................................................................................................................................7

3.4 APPLICATION INFORMATION: VIEW THE BASIC INFORMATION OF THE DEVICE ...............................................................................8

3.5 PASS RECORD .........................................................................................................................................................................................................9

3.6 FACE LIBRARY: INFORMATION OF FACE ........................................................................................................................................................10

A.1 DISCLAIMER .............................................................................................................................................................................. 11

A.2 TRADEMARKS USED IN THIS MANUAL ................................................................................................................................. 11

1.877.877.2269 BLACKBOX.COM

NE E D H E L P?

LE AVE THE TE C H TO U S

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

INSTALLATION STEPS

This quick start guide explains how to install the BDS Temperature Kiosk. Follow the steps listed next.

NOTE: Upon first use, the BDS unit may display inconsistent temperature readings until the unit boots up and the Infrared Sensors warm

up.

NOTE: The BDS supports two languages: English and Chinese. Adding custom language support may require APK and firmware updates

that could potentially take up to one month.

STEP 1. CONNECT THE GATE

Connect the tablet relay cable to the door open button terminal of the gate control board. If the door opening action is reversed, reverse

the line order.

If there is no response, set in the BDS (EZ-Pass) app as follows:

Mode 0: Indicates non-automatic closing mode. The relay will not close automatically after opening the relay.

Mode 1: Represents the auto-closing mode (active high-default low level, then high level for X seconds, last low level). The relay will

automatically close after a delay of X seconds after opening the relay.

Mode 2: Represents the auto-closing mode (active low-default low, then high for X seconds, and finally low). The relay will automatically

close after a delay of X seconds after opening the relay.

STEP 2: REVIEW THE PORTS DEFINITION

2.1 WIRE INTERFACE DEFINITION VERSION 1

12 VDC

USB Host

UBOOT

Wiegand

Output Wiegand

Input

USB OTG

Relay

Ethernet

RS-232

FIGURE 1.

TABLE 1. DELAY

PIN NUMBER TERMINAL ELECTRICAL DEFINITION

1 COM

2 NO

Specyfikacje produktu

Marka:	Black Box
Kategoria:	nawilżacz powietrza
Model:	BDS-8THA-1
Wbudowany wyświetlacz:	Tak
Wysokość produktu:	296 mm
Szerokość produktu:	133 mm
Głębokość produktu:	25 mm
Certyfikaty:	CE
Kraj pochodzenia:	Chiny
Przeznaczenie:	Wewnętrzna
Zakres temperatur (eksploatacja):	0 - 60 °C
Zakres temperatur (przechowywanie):	-20 - 60 °C
Model:	Wolnostojący
Promień działania:	1 m
Typ przetwornika obrazu:	Czujnik temperatury
Zakres pomiaru temperatury:	10 - 42 °C
Zakres pomiarowy temperatury:	F, °C
Numer klasyfikacji kontroli eksportu (ECCN):	5A992