Instrukcja obsługi BlendMount BMG-3030


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BlendMount BMG-3030 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 5.0 gwiazdek

Strona 1/2
Blend
fflounf-®
Innovative
Mounting
Solutions
ESCORT
LEFT
HAND
DRIVE VEHICLE
INSTALLATION INSTRUCTIONS FOR ESCORT IX, REDLINE EX, AND 360C RADAR DETECTORS
Your rear view
mirror
has minimal clearance between the back side
of
the
mirror
and the
mirror
tem. It
is
very important
that
this
mount is installed correctly
to
ensure
mirror
adjustability
is
retained.
PLEASE
READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING THIS MOUNT
NOTE: For illustration purposes, the mount and rear view
mirror
shown In these Instructions may
look
slightly different then
YOUR
mount and rear view mirror.
ALUMINUM
THREADED
INSERT
3 - Install
aluminum
threaded
insert into magnet,
and
attach
magnet
onto
blendmount
with lip
pointed in direction
as
shown
.
1 -
The
magnet
must
be removed from the suction
cup
mount
that
the
radar
detector
came
with.
UNSCREW
HERE
2 -
Unscrew
and
remove bolt,
only
the
magnetic
piece
is
used
with
the
blendmount.
TOP
~f-:~
~
--
SECTION
CLAMP
SCREW
4 - The Body Assembly must be removed to gain access to the CLAMP SCREW.
Remove the two socket head screws as shown above. Be sure to remove the lock
washer with the top screw along with the lock washer and flat washer with the
bottom screw. Loosen the Clamp Screw so there is enough clearance between
the TOP and MID SECTIONS to slide over the mirror stem.
PAGE 1
Of
2


Specyfikacje produktu

Marka: BlendMount
Kategoria: Niesklasyfikowane
Model: BMG-3030

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BlendMount BMG-3030, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane BlendMount

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025