Instrukcja obsługi Bosch B901
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bosch B901 (3 stron) w kategorii System kontroli dostępu. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 12.5 użytkowników na średnio 4.9 gwiazdek
Strona 1/3
Intrusion Alarm Systems | B901 Door Controller
B901 Door Controller
www.boschsecurity.com
uDirect interface to compatible Wiegand card readers
uOn-board buzzer output and supervised on-board
points
uRequest to Exit and Request to Enter inputs that
can have a shunt only option
uFour door states: Locked, Unlocked, Secured, Fire
Unlock
uSDI2 support as well as SDI compatible
The B901 Access Control Interface Module is a fully
supervised, addressable SDI/SDI2 bus device that
allows access control integration for Bosch compatible
control panels. This module offers 14 programmable
levels of access authority. Authority for access is
controlled by the user level, the group of the user, the
time of day, the door state, and the area armed state.
Control each authority restriction through automatic
and manual functions.
A door that has been automatically released by the
control panel will require manually re-engaging to
return to normal.
In a combination Fire/Intrusion system, the B901
should not be used to lock doors used for emergency
egress unless these doors have a mechanical release
mechanism.
Functions
Reader input
• Standard 5-wire Weigand interface.
• +5 VDC or +12 VDC supplied to power readers.
• Open collector output for reader LED.
Unsupervised inputs
• Tamper. Supports normally open devices.
• REX. Supports normally open devices. Request to Exit
(REX) on short.
• RTE. Supports normally open devices. Request to
Enter (RTE) on short.
Supervised input
• 1 kΩ End-of-line resistor.
• Use for door contact.
Door states
Four door states are controlled through the keypad,
RPS (Remote Programming Software), scheduled
events (SKEDs), and automatic programmable
functions in the door controller parameters:
• Locked. The lock relay can be deactivated (door
allowed to open) with a valid credential or REX/RTE
input.
• Unlocked. The Lock relay is held in the deactivated
state to allow access without the need of a
credential.
• Secured. The lock relay is activated and no access is
allowed even with valid credential (overridden by Fire
Unlock).
• Fire Unlock. The lock relay is held in the deactivated
state during a Fire Alarm. This allows free access to
and from the building during an emergency.
Two automatic functions link the door state to the
arming state of the area:
• Auto Door. When the area is Off (disarmed), the door
state is switched to “Unlocked”.
• Disarm on Open. With this function as "Yes," a user
with valid access rights activates the strike and turns
off (disarms) the system after the door is opened.
With this function as "No," the area turns off
(disarms) upon the strike activation.
Specyfikacje produktu
| Marka: | Bosch |
| Kategoria: | System kontroli dostępu |
| Model: | B901 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Bosch B901, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje System kontroli dostępu Bosch
22 Sierpnia 2024
Instrukcje System kontroli dostępu
- Marmitek
- EQ-3
- Delta Dore
- Provision ISR
- Gewiss
- ZKTeco
- DSC
- ONE Smart Control
- APC
- Burg Wächter
- Vimar
- Dahua Technology
- Satel
- Axis
- Assa Abloy
Najnowsze instrukcje dla System kontroli dostępu
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
29 Marca 2025
29 Marca 2025
28 Marca 2025