Instrukcja obsługi Chamberlain CWPIRC
Chamberlain
detektor ruchu
CWPIRC
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chamberlain CWPIRC (4 stron) w kategorii detektor ruchu. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/4
1
Attach Motion Sensor box to
mounting plate with large silver
screw. Tighten screw until
Motion Sensor stays in place
when repositioned.
Motion Sensor
Swivel Bushing
Mounting PlateSun/Rain Shield
Carton Inventory
Assembly and Programming
1
Install 4 AA Alkaline batteries.
(Lithium batteries recommended
for colder environments.)
LED light will fl ash.
2
Antenna
ON
OFF
1 2
SWITCH SETTINGS
Switch #1 Switch #2
Learn
Button
OFF Low Sensitivity
ON High Sensitivity (Default)
NOTE: To avoid detection of small animals
move Switch #2 to OFF.
Motion Sensor
SWITCH #1:
SWITCH #2:
A Ensure Base Station and
Motion Sensor are in close
proximity to each other. Press
and release Learn Button
on Base Station. Buzzer will
sound.
B Within 60 seconds, press the
Learn Button on the inside of
the Motion Sensor. LED light
will illuminate and Base Station
will buzz.
3Learn Button
Test Motion Sensor by waving
hand in front of sensor. LED light
should fl ash and the Base Station
will buzz X number of times
indicating which sensor has been
activated.
Insert battery pack facing away
from circuit board and fasten
cover with the smallest screws
(provided).
NOTE: Ensure the batteries do
not touch the circuit board and
the antenna and battery wires are
not pinched.
4
5
Overview
Learn Button
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth
defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
WIRELESS MOTION ALERT
ADD-ON SENSOR
MODELS CWPIR AND CWPIRC
The Wireless Alert Sensor is a Passive Infra-Red Motion Sensor that detects movement of people and vehicles. Each sensor has its own unique
ID, for a secure radio link. The base station (not provided) can learn the signals of up to 8 sensors. The base station gives a single beep for the
fi rst sensor that is programmed, a double beep for the second, and so on. Additionally, multiple base stations can work with the same sensor to
sound in different places.
OFF 15 Feet (4.5 m) Detection Range
30 Feet (9.1 m) Detection Range
(Default)
ON
Specyfikacje produktu
| Marka: | Chamberlain |
| Kategoria: | detektor ruchu |
| Model: | CWPIRC |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Chamberlain CWPIRC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje detektor ruchu Chamberlain
30 Sierpnia 2024
28 Sierpnia 2024
23 Sierpnia 2024
Instrukcje detektor ruchu
- Lucide
- Orbis
- Arlo
- Megatron
- RAB
- Gigaset
- Brinno
- Merten
- Chacon
- ORNO
- Satel
- Interlogix
- Axis
- Renkforce
- Konig
Najnowsze instrukcje dla detektor ruchu
9 Stycznia 2025
29 Grudnia 2024
29 Grudnia 2024
26 Grudnia 2024
26 Grudnia 2024
25 Grudnia 2024
17 Grudnia 2024
17 Grudnia 2024
17 Grudnia 2024
17 Grudnia 2024