Instrukcja obsługi Clas Ohlson OY380-2
Clas Ohlson
bank mocy
OY380-2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Clas Ohlson OY380-2 (5 stron) w kategorii bank mocy. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.7 gwiazdek
Strona 1/5
English
GREAT BRITAIN • customer service
tel: 0845 300 9799 customerservice@clasohlson.co.uk www.clasohlson.com/uke-mail: internet:
2
3 4
5
6
7
1
Ver. 20140123
Solar Powerbank
Art.no 38-6140 Model OY380-2
Please read theentire instruction manual before using theproduct and
then save it for future reference. We reserve theright for any errors in
text or images and any necessary changes made to technical data.
Ifyou have any questions regarding technical problems please
contact our Customer Services.
Safety
• Never attempt to open or dismantle thesolar charger.
• Never subject thesolar charger to knocks orblows.
• Do not let children play with thesolar charger.
• The solar charger is splashproof but should never be immersed in
water or any other liquid.
• Do not leave thesolar charger in thesun in aconfined space
such as acar, doing so could lead to themaximum operating
temperature (45 ºC) being exceeded.
Buttons and functions
Operating instructions
Charging thesolar charger via thesolarpanel
• Place thesolar charger in thesun.
• The green LED indicator shines strongly or weakly depending on
how efficiently thesolar charger is being charged.
• When thesolar charger is fully charged theLED indicator goesoff.
• In optimum conditions it takes 20 hours to fully charge thesolar charger.
Charging thesolar charger from anexternal power source
• Connect thesolar charger’s built-in USB cable to acomputer,
mains USB charger or 12V car USB charger.
• The green LED indicator comes on to indicate that thesolar charger
is being charged.
• When thesolar charger is fully charged theLED indicator goesoff.
• An external power source takes 5–7 hours to fully charge
thesolar charger.
Charging anexternal device via thesolar charger
Note: Theincluded USB/Micro-USB cable is specially designed for
charging Android phones and is not suitable for data transference.
• Check that thesolar charger is adequately charged by pressing
[ ]. Thebattery charge status is indicated by theLEDs:
- All lit - fully charged
- Two lit - half capacity
- One lit - solar charger needs charging
• The solar charger, can, if at least at half capacity, fully charge
astandard mobile phone.
• The solar charger needs to be fully charged if you wish to utilize
both USB ports and charge two devices simultaneously.
Note: Whenthesolar charger is in use and its battery charge level is
very low, thesolar charger will automatically shut off in order to protect
its battery from adeep discharge. Whenthesolar charger begins to
recharge, it takes 3 minutes before it can output any charging current.
Apple products and other products with their own charger cables
• Use thedevice’s charger cable by connecting it between thedevice
and thesolar charger.
• Press [ to start charging. ]
• Disconnect thecharger cable form thesolar charger to finish charging.
• It takes about 90 minutes to fully charge astandard phone.
• The solar charger shuts off automatically as soon thedevice being
charged is disconnected.
Android phones
• Use theincluded USB/Micro-USB cable by connecting it between
theAndroid phone and thesolar charger.
• Press [ to start charging. ]
• Disconnect thecharger cable form thesolar charger to finish charging.
• It takes about 90 minutes to fully charge astandard phone.
• The solar charger shuts off automatically as soon thedevice being
charged is disconnected.
LED torchlight
Hold in [ for about 2 seconds to switch thetorch on andoff. ]
Care and maintenance
• Clean theproduct using alightly moistened cloth. Onlyuse mild
cleaning agents, never solvents or corrosive chemicals.
• Keep thesurface of thesolar panel clean for optimum performance.
Troubleshooting guide
The external
device is not
being charged.
• Is thesolar charger’s built-in battery charged?
• Have you pressed [ to start thecharging ]
process?
• Is thecable you are using in good condition
and correctly connected to both theexternal
device and thesolar charger?
The solar
charger’s built-
in battery is not
being charged.
The prevailing light conditions are not adequate to
charge thebattery. Waituntil thelight conditions
are better or connect thesolar charger to another
USB charger using thebuilt-in charger cable on
theback of thesolar charger.
Disposal
This product should be disposed of in accordance with local regulations.
Ifyou are unsure how to proceed, contact your local authority.
Specifications
Battery 4000 mAh lithium-polymer
Solar panel 5 V 250 mA max (optimum conditions)
Input voltage 5 V DC/800mA
Output voltage 5 V, 2×1A
Operating temperature 0–45 °C
Size 165×85×15mm
Weight 162g
Front
1. Solar panel for charging thesolar charger’s built-in battery
2. USB port for charging electronic devices
3. LED indicator which shows thesolar charger’s battery charge status
4. LED indicator which shows thesolar charger’s efficiency
5. [ ] On/off
6. USB port for charging electronic devices
Back
7. USB cable for charging thesolar charger’s built-in battery
Specyfikacje produktu
| Marka: | Clas Ohlson |
| Kategoria: | bank mocy |
| Model: | OY380-2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Clas Ohlson OY380-2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje bank mocy Clas Ohlson
21 Sierpnia 2024
21 Sierpnia 2024
21 Sierpnia 2024
21 Sierpnia 2024
19 Sierpnia 2024
16 Sierpnia 2024
8 Sierpnia 2024
Instrukcje bank mocy
- Aluratek
- Best Buy
- Boompods
- GoClever
- Lindy
- Luxa2
- Promate
- Savio
- Vakoss
- Insignia
- Alogic
- Exibel
- Iogear
- Zipper
- SBS
Najnowsze instrukcje dla bank mocy
2 Kwietnia 2025
30 Marca 2025
30 Marca 2025
28 Marca 2025
27 Marca 2025
27 Marca 2025
27 Marca 2025
27 Marca 2025
13 Marca 2025
13 Marca 2025