Instrukcja obsługi Cocraft 40-6925
Cocraft
nieskategoryzowany
40-6925
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cocraft 40-6925 (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 4 użytkowników na średnio 3.8 gwiazdek
Strona 1/4

GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk
and click on customer service. INTERNET: www.clasohlson.co.uk
Features
1. Internal measuring jaws
2. External measuring jaws
3. Slider for depth / height measurement
4. Step measuring faces
5. Measuring scale
6. Metric/inches scale
7. Battery cover
8. LCD display
9. Locking screw
10. Thumb roller
11. OFF/ON switch
12. ZERO (reset) switch
13. Inch/mm switch
Operation
1 Before use
• The measuring device can only be moved once the locking screw (9)
has been opened.
• Wipe off the measuring scale and all measuring surfaces.
• Make sure that the display and all function buttons are in working order.
2 Measuring
• Loosen the locking screw (9).
• Press [OFF ON] (11), then press inch/mm (13) to select measuring units.
Each press of the button switches between inches and mm. The display
comes on automatically when the measuring device is moved even if you
do not press [OFF ON].
• Pinch the measuring jaws together to 0 and press [ZERO] (12) to reset
the device to prepare it for use.
• Press [OFF ON] (11) to turn off the device after a completed measurement.
External measuring Internal measuring
Differential measuring
Care
• Wipe off the entire measuring scale with a soft cloth in order to avoid
faulty readings caused by excess humidity.
• Keep the measuring device dry and clean. Do not use solvents for cleaning.
• Turn off the measuring device when not in use to save the batteries.
• Never measure surfaces that are current carrying.
• Never use and engraver to mark measurements the measuring device
may become damaged.
• An inaccurate measurement can occur when changing the battery. In this
case remove the battery and wait 30 seconds before replacing it.
Changing the battery
When the display becomes weak the battery needs to be changed. Remove
the battery cover using a small screwdriver and change the battery, with the
plus (+) side facing outwards.
Troubleshooting
Problem Possible Cause Solution
Weak display. Low battery voltage
below 1.45 V.
Replace battery.
Measurement is static
when the measuring
device is moved.
Temporary problem
with the measuring
device.
Remove the battery and
replace it after 30 seconds.
Decreased accuracy
+/- 0.01 mm.
Sensor is dirty. Wipe off the entire measur-
ing scale with a soft cloth.
Nothing on the display. Battery voltage
below 1.4 V.
Replace battery.
Technical specifi cations
Measurement range: 0-150 mm/0-6″
Resolution: 0.01mm/0.0005″
Accuracy: ± 0.02 mm/0.001 (<100 mm)*″
Accuracy: ± 0.03 mm/0.001 (>100 mm)*″
Repeatable accuracy: 0.01 mm/0.0005″
Measuring system: Linear capacitive measuring system
Display: LCD display
Power supply: SR44, 1.50V button cell battery
Operating temperature: 5°C - 40°C, 41 - 104°F
* Accuracy is decreased markedly if humidity is above 80 % RH
(relative humidity).
40-6925
Digital Vernier Caliper
Depth/height measuring
Step measuring
5
7 381 9
1011
4
2 613 12
25,4 mm
25,4 mm
25,4 mm
Specyfikacje produktu
| Marka: | Cocraft |
| Kategoria: | nieskategoryzowany |
| Model: | 40-6925 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Cocraft 40-6925, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nieskategoryzowany Cocraft
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
Instrukcje nieskategoryzowany
- Ashly
- Baby Lock
- Aspes
- Waves
- Olympia
- Medicinalis
- Viewsonic
- Optoma
- Proxxon
- Lorex
- JUNG
- Jane
- Gree
- Tactical Fiber Systems
- Shelly
Najnowsze instrukcje dla nieskategoryzowany
28 Października 2024
28 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024