Instrukcja obsługi Cocraft LS4T
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cocraft LS4T (40 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.7 gwiazdek
Strona 1/40
Important!
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
Ver. 20160210
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
40-9511 LS4T
LS4T
4T
40-9511
LOG SPLITTER
VEDKLYV VEDKLØYVER
HYDRAULIHALKOJA HOLZSPALTER
VARIABLE SPLITTING LENGTH: 15-37 CM
ENGLISHSVENSKANORSKSUOMIDEUTSCH
3
ENGLISH
Log Splitter LS4T
Art.no 40-9511 Model LS4T
Please read theentire instruction manual before using theproduct and then save it for future reference.
We reserve theright for any errors in text or images and any necessary changes made to technicaldata.
If you have any questions concerning technical problems please contact our Customer Services.
Safety
Warning: Whenusing this machine, theincluded safety instructions should always be followed to avoid risk of
fire, electric shock, and personal injury. Readtheentire instruction manual before using themachine and keep it
for future reference. Always pull theplug out of thewall socket before servicing and adjusting themachine.
General safety instructions for your safety and the safety of others
1. Keep theworking areatidy.
Cluttered surfaces and benches invite accidents.
2. Do not use themachine in dangerous environments.
Themachine should not be used on moist or wet surfaces or inrain. Makesure that thework area is welllit.
Whenworking in dusty atmospheres, make sure that theair is adequately circulated. Donot operate electric
machinery in areas where they can cause afire or explosion.
3. Reduce therisk of electric shocks.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators
when using electric machinery.
4. Keep children and bystandersaway.
Keep children and visitors at asafe distance from electric machinery and electric cables in theworkplace.
5. Store electric machinery out of thereach of children.
Store electric machinery/tools locked away in asafe place, away from children.
6. Do not force themachine.
Thecorrect feed rate makes thework better andsafer.
7. Use thecorrect tool for thejob.
Do not force atool to perform atask that it was not designedfor.
8. Wear suitable attire.
Do not wear any loose-fitting clothing, gloves, necklaces, bracelets or other jewellery that can get caught in
movingparts. Non-slip footwear is recommended. Wearahairnet or similar if you have longhair.
9. Always use safety glasses.
Normal glasses are not tough enough to withstand impacts. Useadust mask or dust filter when working in
dusty environments.
10. Connect dust extraction equipment.
If themachine is equipped with dust extraction equipment, ensure that it is connected and used properly.
Makesure to empty thedust bag regularly.
11. Do not abuse themainslead.
Do not carry themachine by its mainslead. Donot yank themains lead to unplug theair compressor, hold
theplug when pulling it out of thesocket. Makesure that themains lead does not come into contact with
heat, oil, or sharpedges.
12. Secure theworkpiece firmly.
Where possible, use clamps or avice. Youcan then operate themachine using twohands. Thisis much
safer than holding theworkpiece in onehand.
13. Do not overreach.
Make sure that you stand steady and balanced at alltimes.
14. Look after yourtools.
Keep blades sharp and clean for thebest and safest performance. Follow themanual’s recommendations
regarding lubrication and replacement of accessories. Inspect themains lead regularly. Ifit is damaged it
should be replaced by aqualified service technician. Inspect all leads and cables regularly to check for any
damage. Makesure that themachine’s handles and controls are clean, dry and free from oil, greaseetc.
15. Turn thepoweroff.
Pull out theplug and push in theemergency stop button before servicing or changing any blades, drill bits,
cutters or sandingdiscs.
Specyfikacje produktu
| Marka: | Cocraft |
| Kategoria: | nieskategoryzowany |
| Model: | LS4T |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Cocraft LS4T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nieskategoryzowany Cocraft
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
Instrukcje nieskategoryzowany
- nieskategoryzowany ETC
- nieskategoryzowany InFocus
- nieskategoryzowany Adder
- nieskategoryzowany Princess
- nieskategoryzowany Vacmaster
- nieskategoryzowany Clatronic
- nieskategoryzowany AVPro Edge
- nieskategoryzowany Newland
- nieskategoryzowany Hikmicro
- nieskategoryzowany Cardo
- nieskategoryzowany American DJ
- nieskategoryzowany Inverx
- nieskategoryzowany Nedis
- nieskategoryzowany Aputure
- nieskategoryzowany Mybeo
Najnowsze instrukcje dla nieskategoryzowany
28 Października 2024
28 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024