Instrukcja obsługi Coleman Sundome

Coleman namiot Sundome

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Coleman Sundome (4 stron) w kategorii namiot. Ta instrukcja była pomocna dla 37 osób i została oceniona przez 19 użytkowników na średnio 4.4 gwiazdek

Strona 1/4
Connect Frame to Tent
Insert one end of main tent pole
onto pin of pin & ring system at tent
corner. (illus. 3)
Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole.
Repeat for second pole. (illus. 4)
1Layout & Positioning
of Tent, Pole Assembly
Layout and position tent with door
facing desired direction. (illus. 1)
Unzip door.
Stake down tent using the rings of the
pin & ring system at the corners of the
tent. Keep the floor taut. (illus. 2)
Assemble frame poles by
interlocking shock-corded poles.
This will make two long poles.
Insert the poles diagonally into pole
sleeves.The center of the poles should
cross forming an “X” in the middle of
tent. (illus. 1)
2
Assembled poles
inserted through
pole sleeves
illus. 1
illus. 4
Tent frame set-up
illus. 2
Tent stake through ring
illus.3
Insert pole end onto
pin & ring
SUNDOME®7’x7
When You Are Ready To Set
Up Your Tent
– Select a level campsite clear of
rocks, branches and other hard
or sharp objects.
Do not set up your tent under trees.
– For best results in windy conditions,
do not position the door of tent
into the wind.
Rainfly
Pole
Rainfly Part No.
9180-3041
Main Tent
Poles
POLE ASSEMBLY PARTS
Instructions apply to Part Number 2000001114
Part No. 9180-3061
Part No. 9180-3051


Specyfikacje produktu

Marka: Coleman
Kategoria: namiot
Model: Sundome

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Coleman Sundome, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą