Instrukcja obsługi Craftsman CMSTE8VT
Craftsman
Niesklasyfikowane
CMSTE8VT
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Craftsman CMSTE8VT (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.9 gwiazdek
Strona 1/4
ENGLISH
Versatrack™
WARNING: To reduce the risk of serious personal
injury, do not use a damaged Versatrack™ hook or
Versatrack™ Trackwall. A damaged Versatrack™ hook
or Versatrack™ Trackwall will not support the weight
of the tool.
WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the Versatrack™ hook
is securely tightened.
WARNING: To reduce the risk of serious personal
injury, ensure the fitting holding the hang hook
issecure.
WARNING: To reduce the risk of serious personal
injury, DO NOT suspend tool overhead or suspend
objects from the hook. ONLY suspend tool on the
Versatrack™ Trackwall using the hook.
WARNING: Ensure that the tool weight does not
exceed the maximum rated weight of 20 lb (9 kg) for
the selected Versatrack™ hook.
WARNING: When hanging objects on a Versatrack™
Trackwall rail, adequately space the tools in order to
not exceed 75 lb (35 kg) per linear foot.
NOTE: Versatrack™ accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN, call 1-888-331-4569.
Cordless (Fig. A)
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can causeinjury.
IMPORTANT: When attaching the Versatrack™ hang
hook, use only the screw that is provided. Be sure to
securely tighten the screw. Versatrack™ accessories
mount compatible tools securely to the Versatrack™
Trackwallsystem.
1. Turn tool off, remove the battery pack and
removeaccessories.
CAUTION: Any product with exposed cutting teeth
must have them covered securely if it is to be on
theVersatrack™ Trackwall.
2. Attach the hang hook on the tool.
a. Place the Versatrack™ hang hook 1 onto the
mounting location at the base of the tool as shown.
b. Use a screwdriver to secure the hang hook with
the provided screw 2 . Do not use any other screw
forthis.
1
Fig. A
2
Corded (Fig. B)
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can causeinjury.
IMPORTANT: Versatrack™ accessories mount compatible
tools securely to the Versatrack™ Trackwallsystem.
1. Turn tool off, disconnect it from power source and
removeaccessories.
CAUTION: Any product with exposed cutting teeth
must have them covered securely if it is to be on
theVersatrack™ Trackwall.
2. Mount the peg hook 3 to the Versatrack™ Trackwall
with the CRAFTSMAN logo properly oriented as shown.
3. Slide the tool loop 4 to the base of the peg hook.
NOTE: Ensure that the tool loop slides all the way to the
base of the peg hook. This relieves strain on the peg hook
and trackwall and may prevent the tool from falling.
Fig. B
3
4
Pneumatic (Fig. C)
WARNING: To reduce the risk of serious personal
injury, remove the air supply before making any
adjustments or removing/installing attachments
or accessories. An accidental actuation can
causeinjury.
IMPORTANT: Versatrack™ accessories mount compatible
tools securely to the Versatrack™ Trackwallsystem.
1. Remove the air supply and accessories.
INSTRUCTION MANUAL
MANUEL D’INSTRUCTIONS
MANUAL DE INSTRUCCIONES
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY CRAFTSMAN TOOL, CALL US TOLL FREE AT:
888-331-4569.
Specyfikacje produktu
| Marka: | Craftsman |
| Kategoria: | Niesklasyfikowane |
| Model: | CMSTE8VT |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Craftsman CMSTE8VT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Craftsman
8 Października 2024
25 Września 2024
25 Września 2024
25 Września 2024
21 Września 2024
21 Września 2024
17 Września 2024
16 Września 2024
15 Września 2024
14 Września 2024
Instrukcje Niesklasyfikowane
- Gentrax
- Apelson
- Joby
- Loctite
- Progress
- AKAI
- ACL
- Extech
- Antelope Audio
- Thermomate
- Lindam
- Roadstar
- Pieps
- Da-Lite
- INOGENI
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025