Instrukcja obsługi CRUX AUX-BM4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CRUX AUX-BM4 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 3 użytkowników na średnio 4.7 gwiazdek

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.080719

1 of 2

R

INTERFACING SOLUTIONS

- The AUX-BM4 will enable the Auxiliary Audio Input on the OEM navigation radio menu.

PRODUCT FEATURES:

PARTS INCLUDED:

INSTALLATION INSTRUCTIONS:

AUX-BM4 OBD CoderAudio Input Cable

AUX-BM4

Auxiliary Input Interface and OBD Coder for Select

BMW Vehicles with Business or Professional Navigation System

1. Locate OBD-port and remove cover (commonly located under the dashboard on the driver side).

2. Turn ignion switch to ACC.

3. Wait unl the navigaon has booted.

4. Plug coder into OBD-port.

5. The navigaon will re-boot.

6. When the navigaon startup-screen shows, remove coder from OBD-port.

7. Your radio’s Auxiliary Audio input feature is now enabled.

To remove the Auxiliary Audio feature from the navigaon’s menu repeat steps 1-6. Aer the rst use on a

vehicle, the coder AUX-BM4 is personalized to this vehicle. On this vehicle the enabling and removing the

Audio-AUX feature can be repeated without limit.

The AUX-cable must be connected into the female Quadlock connector of the vehicle harness on the

back of the radio (receiver under the AC vents).

Quadlock connector, chamber B

Pin 2 ● Audio (+) le (white)

Pin 7 ● Audio (+) right (red)

Pin 8 ● Audio (-) ground (black)

Specyfikacje produktu