Instrukcja obsługi CRUX CS-TJ20

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CRUX CS-TJ20 (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 6 użytkowników na średnio 4.0 gwiazdek

CS-TJ20

Radio Replacement with Steering Wheel Control Retention for

LEXUS & TOYOTA Vehicles with JBL Systems

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

PRODUCT FEATURES:

- Retains factory features in select Lexus and Toyota vehicles with JBL Harman-Becker Digital-Synthesis Amplier,

including JBL (Pioneer-made) ampliers while funconing with an aermarket radio.

- Pre-programmed to retain factory Steering Wheel Controls.

- iPhone Voice Recognion (VR) feature from SWC on select Kenwood, Pioneer, Alpine and JVC radios.

- Variable audio gain adjustment to level match the aermarket radio and factory amplier.

- Retains OEM 3.5mm Auxiliary Audio Input.

- Supports BT-HF/A2DP/AVRCP prole on select aermarket radio models.

- Supports Pick Up/End Call, Pick up and Toggle between 1st and 2nd incoming call, AVRCP Track, Seek.

- EIA color coded wiring for easy installaon.

NOTES:

1. Le-Right Balance Audio Control and Front-Rear Audio Fading is not supported.

2. Please make sure factory radio Balance and Fade opons are centered before removing the radio.

PARTS INCLUDED:

CS-TJ20 ModuleTY-A Harness

(For Newer Models)

TY-B Harness

(For Older Models)

3.5MM to 4-pin SWC CablesOEM Camera Retenon Harness16 to 24 Pin Camera Adapter

1. In some Lexus/Toyota vehicles 2006 and older, the mute circuit is located in the same pin locaon as the amplier

turn-on on the OEM harness. If no audio is heard aer the installaon is complete, disconnect the BLUE/WHITE wire

on the CS-TJ20 T-Harness from the aermarket radio AMP Turn-on wire. Insulate with tape to avoid short circuits.

2. Before connecng the 3.5mm SWC Cable, thoroughly wipe it clean with the alcohol cleansing pad provided. This will

ensure a solid contact with the aermarket radio SWC circuit.

3. To retain the factory AUXILIARY INPUT opon in the vehicle, the aermarket radio must have an “Auxiliary Audio

Input” feature. Please check your aermarket radio manual for details.

IMPORTANT INSTALLATION NOTES:

rev.091719

1 of 5

Specyfikacje produktu