Instrukcja obsługi CRUX DKGM-15

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CRUX DKGM-15 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.9 gwiazdek

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.091522

1 of 4

- Retains factory features in select GM Class II Data Bus vehicles while functioning with an aftermarket radio.

- Pre-programmed to retain factory Steering Wheel Controls.

- Supports Bose, non-Bose and Y-91 audio systems.

- Retains OnStar and chime functions.

- EIA color coded wiring for easy installation.

- Includes Double Din Dash kit

PRODUCT FEATURES:

INSTALLATION DIAGRAM:

AFTERMARKET

RADIO

Reverse Gear Purple/White

Parking Brake Yellow/Black

Illuminaon (+) Orange

Amplifier Turn-on Blue/ White

+12V Constant Yellow

+12V ACC Red

Ground Black

Right Front (+) Gyra

Right Front (-) Gray/Black

Le Front (+) White

Le Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Le Rear (+) Green

Le Rear (-) Green/Black

TO FACTORY

HARNESS

24-Pin

Connector

8-Pin

Connector

BOSENON

BOSE

10-Pin

Connector

SWC DIP SWC

1 2 3 4

ON

Chime Volume

Adjustment

4-Pin

Connector

Cap or insulate if

not being used

3.5MM SWC CABLE

Plug in the 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

JVC/Kenwood (Blue / Yellow)

To aftermaket

radio SWC wire or

3.5mm port

DKGM-15 Module

DOUBLE DIN DASH KIT

DKGM-15 HarnessSWC CableAntenna Adapter

NOTES:

1. The Front and Rear fading are not retained on Y-91 Bose System.

2. The OnStar volume output is defaulted to low gain.

3. Does not retain rear seat volume controls.

PARTS INCLUDED:

R

INTERFACING SOLUTIONS

DKGM-15

Radio Replacement with OnStar, SWC Retention, & Double DIN

Dash Kit for GM Class II Vehicles 2003 - 2013

Specyfikacje produktu