Instrukcja obsługi CRUX DKGM-C2S
CRUX
Niesklasyfikowane
DKGM-C2S
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CRUX DKGM-C2S (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.8 gwiazdek
Strona 1/8

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.092921
DKGM-C2S
Radio Replacement with Single DIN Dash Kit for
GM Class II Vehicles 2002 - 2013
1 of 8
- Retains factory features in select GM Class II Data Bus vehicles while functioning with an aftermarket radio.
- Supports Bose, Y-91 and non-amplied audio systems.
- Retains chime functions such as: seat belt, check engine, key in ignition, low fuel, low oil and lights on.
- Retains RAP (Retained Accessory Power).
- Single DIN Dash Kit included.
- EIA color coded wiring for easy installation.
DKGM-C2S MODULE DKGM-C2S HARNESS SINGLE DIN DASH KIT
RA D I O R E P L ACE M E N T
+
R
INTERFACING SOLUTIONS

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
2 of 8
DKGM-C2S
Radio Replacement with Single DIN Dash Kit for
GM Class II Vehicles 2002 - 2013
RA D I O R E P L ACE M E N T
+
R
INTERFACING SOLUTIONS
SELECTING THE AUDIO SYSTEM:
If the vehicle is equipped with an amplied audio system, the DKGM-C2S has a built-in audio level
adaptor that outputs the proper audio level from the aftermarket radio to the factory amplier. To use this
feature, plug in the male 8-pin connector on the DKGM-C2S harness to the GRAY female 8-pin connector
on the DKGM-C2S module. The module is also labeled “Bose” and “Non Bose” to avoid confusion. (see
picture below)
If the vehicle is NOT equipped with a factory amplied system, plug in the male 8-pin connector to the
BLACK female 8-pin on the DKGM-C2S module.
Non-BOSE
(Non-Amplied)
Connecon
BOSE
(Amplied)
Connecon
CHIME VOLUME ADJUSTMENT:
The DKGM-C2S has a potentiometer to adjust the chime volume. It is set at half way by default. To
adjust the volume, simply use a suitable screw driver and turn the potentiometer clockwise to increase
the volume and counter-clockwise to decrease the volume.
Chime
Volume
Adjustment
rev.092921

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
3 of 8
DASH KIT INSTALLATION:
DKGM-C2S
Radio Replacement with Single DIN Dash Kit for
GM Class II Vehicles 2002 - 2013
RA D I O R E P L ACE M E N T
+
R
INTERFACING SOLUTIONS
Please make sure that you have all the parts as shown.
rev.092921
Specyfikacje produktu
Marka: | CRUX |
Kategoria: | Niesklasyfikowane |
Model: | DKGM-C2S |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z CRUX DKGM-C2S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane CRUX
3 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Gamesir
- Niesklasyfikowane Blebox
- Niesklasyfikowane Edision
- Niesklasyfikowane Heckler & Koch
- Niesklasyfikowane Decimator
- Niesklasyfikowane Swissonic
- Niesklasyfikowane FSR
- Niesklasyfikowane ICE Watch
- Niesklasyfikowane BOYA
- Niesklasyfikowane Brabantia
- Niesklasyfikowane Roxio
- Niesklasyfikowane Solis
- Niesklasyfikowane BBB
- Niesklasyfikowane Sanyo
- Niesklasyfikowane Antelope
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025