Instrukcja obs艂ugi CRUX RVCAD-81B


Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla CRUX RVCAD-81B (10 stron) w kategorii Niesklasyfikowane. Ta instrukcja by艂a pomocna dla 15 os贸b i zosta艂a oceniona przez 8 u偶ytkownik贸w na 艣rednio 3.6 gwiazdek

Strona 1/10
- Ac顕坴ates Reverse camera input in Non MMI Audi vehicles.
- Rear-view camera input.
- Provides three AV Inputs.
- With OE type Dynamic Parking Assistance + PDC.
- -screen display and setup. On
AUDI
2008 - 2014
A4
2008 - 2014
A6
2008 - 2014
Q5
- Works on Audi vehicles with Non MMI systems (no MMI Control Knob behind the gear shi顔乪r).
1 / 10
rev.0119 17
Connec顔畁g the CAN Wires
Connect CAN-H- (Brown+Green-3Pin) of the interface to CAN High (Orange + Brown) of the car HS
Connect CAN-L- (Green-4pin) of the interface to CAN Low (Orange + Green) of the carHS
2 / 10
rev.011917
Connection of LCD Wires
1. Unplug the OE LCD cable from a monitor and connect to the supplied LVDS-IN cable.
Please refer to the photo above The ACC wire should be at the bottom (see arrow) . WARNING: .
2. Connect the other end the original LVDS IN cable to LVDS IN port of the interface. of
3. Connect the supplied LVDS-OUT cable to OEM Monitor and connect the other end to the LVDS OUT
port of the interface.
3 / 10
rev.011917


Specyfikacje produktu

Marka: CRUX
Kategoria: Niesklasyfikowane
Model: RVCAD-81B

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z CRUX RVCAD-81B, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮