Instrukcja obsługi CRUX RVCHN-76D

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CRUX RVCHN-76D (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5 użytkowników na średnio 4.5 gwiazdek

RVCHN-76D

Rear View Integration with Lip Mount Camera for

Select Honda Odyssey EX Vehicles with 8” Screen 2011-2013

R

INTERFACING SOLUTIONS

Sightline

Multi View Integration

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.102120

1 of 2

- Automacally switches to rear-view when vehicle is in reverse gear.

- Aermarket lip mount rear view camera included.

- Plug & Play Installaon.

PRODUCT FEATURES:

INSTALLATION DIAGRAM:

Video

Connection

WHITE**

Parking Line

Cut = OFF / Connect = ON

BLUE

(not used

keep connected)

**NOTE: Changes to the parking line option

will take eect after a power cycle.

Camera Power

Regulator

*Camera Ground

(to chassis)

Red wire

Not Used (Insulate)

Make sure the arrows

line up and push in

the connectors well.

8” Factory

Screen

Radio

To factory

screen

To factory

harness

Green Connector at fuse Panel

(Driver’s left kick panel)

Pin 4

Brown/Silver wire

(Reverse Camera Trigger)

Use a length of 18 gauge wire (not included) and

tap the RED camera power wire from the Yellow

RCA to the pin# 4 (BROWN/SILVER) wire on the

Green connector in the fuse panel. This is the

factory reverse trigger wire.

PARTS INCLUDED:

RVCHN-76D HarnessCUL-03 Lip Mount Camera

Specyfikacje produktu