Instrukcja obsługi CRUX SOOGM-16K

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CRUX SOOGM-16K (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 4 użytkowników na średnio 4.4 gwiazdek

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

1 of 4

RADREPLAT IO CE MEN

SWC ENTRETION

+

R

INTERFACING SOLUTIONS

PRODUCT FEATURES:

INSTALLATION DIAGRAM:

SOOGM-16K MODULE SOOGM-16K HARNESS SWC CABLES

20-Pin Connector Harness

SOOGM-16K

Radio Replacement Interface with OnStar® & SWC Retention

for Select 7” GM IOA & IOB Vehicles

AFTERMARKET

RADIO

Reverse Purple/White

Illuminaon ti Orange

VSS Red/Black

+12V Constant Yellow

+12V ACC Red

Ground Black

Right Front (+) Gray

Right Front (-) Gray/Black

Left Front (+) White

Left Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Left Rear (+) Green

Left Rear (-) Green/Black

Parking Brake Yellow/Black

16-Pin

Connector

8-Pin

Connector

BOSE NON

BOSE

8-Pin

Connector SWC DIP SWC

1 2 3 4

ON

Chime Volume

Adjustment

4-Pin

Connector

Cap or insulate if

not being used

3.5MM SWC CABLE

Plug in the 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

JVC/Kenwood (Blue / Yellow)

To aftermarket

radio SWC wire or

3.5mm port

LAN Bus not recognized

LAN Bus recognized

ANTENNA ADAPTER

TO FACTORY

HARNESS

- Retains factory features in select GM IOA & IOB vehicles while functioning with an aftermarket radio.

- Pre-programmed to retain factory Steering Wheel Controls.

- iPhone Voice Recognition (VR) feature from SWC on select radios.

- Supports Pick Up/End Call, Pick up and oggle between 1st and 2nd incoming call, TAVRCP Track, Seek.

- Supports Non Amplified Systems

- Retains factory OnStar®

- Retains chime functions.

- Retains factory backup camera* & auxiliary input.

- Retains factory backup sensors / park assist system.

NOTE:

- Use the GM-CAM-HAR-DIS for IOB Build Code vehicles to connect to the original display harness,ensuring

camera signal retention when replacing the factory display.

- Does not retain factory Bose amplifier

Red/White A RC

Yellow RCA

(Retain OE Camera)

Rear View Camera Signal

GM-CAM-DIS HARNESS

rev.052024 10

PARTS INCLUDED:

Specyfikacje produktu