Instrukcja obs艂ugi CRUX SWRAD-55


Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla CRUX SWRAD-55 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja by艂a pomocna dla 13 os贸b i zosta艂a oceniona przez 7 u偶ytkownik贸w na 艣rednio 3.5 gwiazdek

Strona 1/2
- Retains factory features in select Audi vehicles while functioning with an aftermarket radio.
- Supports amplified and non-amplified systems.
- EIA color coded wiring for easy installation.
- DOES NOT maintain Rotary Type Steering Wheel Controls (SWC).
SWRAD-55 Module
ISO Harness
Quadlock Harness
1 / 2
r .032017 ev
For Bose System:
Connect all 4 (front and rear) RCA connectors only. No speaker wire connections needed.
For Non-Amplified Systems:
Connect the 8 speaker wires. No RCA connection is needed.
For Vehicles with Rear Factory Subwoofer amplifier:
Connect the front channel speaker wires only. Then connect the rear RCA connectors.
Note: For Bose and Rear Factory Sub, connect the Blue wire.
SETTING THE AFTERMARKET RADIO BRAND
This step is done on the SWR - module. With the key in the off position, set the DIP switches to the AD 55
corresponding radio being used.
3.5MM SWC CABLE
Use the proper 3.5mm to 4-Pin SWC cable for the aftermarket radio you are using.
OPTION A is used for ALPINE, CLARION, (JVC and KENWOOD units will use the Blue/Yellow wire).
OPTION B is used for BOSS, DUAL, FAHRENHEIT, JENSEN, POWER ACOUSTIK, PIONEER, SONY and
SOUND STREAM units.
NOTE: Cap or insulate the 3.5mm plug or Blue/Yellow wire if not being used.
AUDI
2002 - 2010 A3
2001 - 2009 A4
2008 - 2010 A5
2002 - 2004 A6
2004 - 2009 S4
2009 - 2010 Q5
2002 - 2010 TT
2 / 2
r .032017 ev


Specyfikacje produktu

Marka: CRUX
Kategoria: Niesklasyfikowane
Model: SWRAD-55

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z CRUX SWRAD-55, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮