Instrukcja obsługi CRUX SWRCR-59D

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CRUX SWRCR-59D (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 7 użytkowników na średnio 4.7 gwiazdek

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.101320

SWRCR-59D

Radio Replacement with Steering Wheel Control Retention

for Select Dodge, Fiat, Jeep and RAM Vehicles

1 of 2

RAD IO RE PLAC EMENT

SWC RE TENTION

+

R

INTERFACING SOLUTIONS

- Retains factory features in select Dodge, Fiat, Jeep and RAM vehicles while functioning with an aftermarket radio.

- Retains Steering Wheel Controls via built-in, pre-programmed interface.

- Provides accessory power (2A Max).

- Retains factory backup camera.

- Retains factory Aux input in select vehicles.

- Retains factory analog amplier on select vehicles.

- Retains factory SWC phone button functionality in select vehicles.

- EIA color coded wiring for easy installation.

PRODUCT FEATURES:

PARTS INCLUDED:

INSTALLATION DIAGRAM:

SWRCR-59D ModuleSWRCR-59D HarnessSWC Cables

AFTERMARKET

RADIO

+12V Constant Yellow

Ground Black

+12V ACC Red

Reverse Trigger Red/White

VSS (Vehicle Speed Sense) Purple/White





Right Front (+) Gray







Right Rear (+) Violet







To Retain Factory Aux Input Red/White RCA

To Retain Factory Backup Camera Yellow RCA12-Pin

Connector

1 2 3

ON

4-Pin

Connector

Option A:

Option B:

Cap or insulate if

not being used

BLUE / YELLOWInsulate with tape

if not being used

3.5MM SWC CABLES (Option A or B)

Use the proper 3.5MM to 4-Pin cable for your radio.

Plug in the selected 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

TO FACTORY

HARNESS

To the aftermarket

radio 3.5mm SWC

port or SWC wires

Specyfikacje produktu