Instrukcja obsługi CRUX SWRGM-51

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CRUX SWRGM-51 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 3 użytkowników na średnio 4.0 gwiazdek

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.020420

1 of 3

ROPLATADI RECEMEN

SWETTIONC REN

+

R

INTERFACING SOLUTIONS

- Retains factory features in select GM LAN 11 Bit vehicles while functioning with an aftermarket radio.

- Pre-programmed to retain factory Steering Wheel Controls.

- Supports Bose, non-Bose and Y-91 audio systems.

- Retains chime functions.

- Retains front and rear parking sensors.

- EIA color coded wiring for easy installation.

PRODUCT FEATURES:

PARTS INCLUDED:

INSTALLATION DIAGRAM:

SWRGM-51 MODULEGM-51A HARNESSGM-51B HarnessSWC CABLESAntenna Adapter

AFTERMARKET

RADIO

1 2 3

ON

AFTERMARKET

RADIO SELECTOR

(See Chart)

Reverse Red/White

Illuminaon (+) Orange

Amplifier Turn-on Blue/ White

+12V Constant Yellow

+12V ACC Red

Ground Black

Right Front (+) Gyra

Right Front (-) Gray/Black

Le Front (+) White

Le Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Le Rear (+) Green

Le Rear (-) Green/Black

TO FACTORY

HARNESS

16-Pin Black

Connector

3.5MM SWC CABLES (Option A or B)

Non BoseBose

See page 2 for Audio

connection options

OR

24-Pin

Connector

Harness

16 & 14-Pin

Connector

Harness

Use the proper 3.5MM to 4-Pin cable for your radio.

Plug in the selected 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

Option A:

Option B:

Cap or insulate if

not being used

BLUE / YELLOW wire for JVC & KENWOOD

Insulate with tape

if not being used

SWRGM-51

Radio Replacement Interface with Steering Wheel Control Retention

for Select GM LAN 11-Bit Vehicles 2006-2012

NOTE:

Does retain OnStar.NOT

TROUBLESHOOTING

LED

LIGHT

LED MODULE FEEDBACK

Solid blue

Flashing blue

Solid redModule providing 12V ACC

CAN not recognized

CAN recognized

12V ACC OFFRed off

Specyfikacje produktu