Instrukcja obsługi CRUX SWRNS-63T


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CRUX SWRNS-63T (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 12 użytkowników na średnio 4.8 gwiazdek

Strona 1/2
- Retains factory features in select Nissan vehicles while functioning with an aftermarket radio.
- Pre-programmed to retain steering wheel controls.
- Supports Bose amplified and non-amplified systems.
- EIA color coded wiring for easy installation.
SWRNS-63T MODULE
SWRNS-63T HARNESS
SWC CABLES
1 / 2
rev.072117
SETTING THE AFTERMARKET RADIO BRAND
This step is done on the SWC Module. With the key in the off position, set the DIP switches to the
corresponding radio being used.
4-PIN SWC CABLE
The SWRNS-63T Module allows for both types of connections:
OPTION A is used for ALPINE, CLARION, (JVC and KENWOOD units will use the Blue/Yellow wire)
OPTION B is used for BOSS, DUAL, FAHRENHEIT, JENSEN, POWER ACOUSTIK, PIONEER, SONY and
SOUND STREAM units.
NOTE: Cap or insulate the 3.5mm plug or Blue/Yellow wire if not being used.
SETTING THE NISSAN SWC
NISSAN
Using Connector “A (see installation diagram) Using Connector “B” (see installation diagram)
2005 – 2006 Altima
2006 Maxima
2005
– 2006 Frontier
2005
– 2006 Pathfinder
2005 – 2006 Xterra
2007 – 2011 Frontier
2009
– 2010 Titan
2007
– 2010 Xterra
NOTE: Analog Signal Output provided may not cover all model/year listed.
2 / 2
rev.072117


Specyfikacje produktu

Marka: CRUX
Kategoria: Niesklasyfikowane
Model: SWRNS-63T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z CRUX SWRNS-63T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą