Instrukcja obsługi CyberData Systems 011181


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CyberData Systems 011181 (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 10 użytkowników na średnio 5.0 gwiazdek

Strona 1/4
Quick Start Guide 930466A
The IP Endpoint Company
1.0 Out-of-Box and Prior to Final Installation
1.1. Verify that you have received all of the parts listed on the Installation Quick
Reference placemat.
1.2. Download the current manual, otherwise known as an Operation Guide,
which is available on the Documentation page at the following website
address:
http://www.cyberdata.net/products/voip/digitalanalog/ceilingspkr2ptt/docs.html
Note You can also navigate to the Documentation page by going to
www.CyberData.net
and following the steps that are indicated by
the following figures:
2.0 Select Power Source
PoE Switch PoE Injector
Set PoE power type to Class 0 = 15.4W CAT6 cable recommended—
for longer distances
Be sure you are using a non-PoE switch or port
Make sure port is not in trunk mode
Set port to full duplex/ 100mbps
Spanning Tree Protocol (STP) must be disabled or Portfast enabled
2
3
1
VoIP V2 Ceiling Speaker, Push-to-Talk,
Quick Start Guide


Specyfikacje produktu

Marka: CyberData Systems
Kategoria: głośnik
Model: 011181

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z CyberData Systems 011181, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą