Instrukcja obsługi CyberData Systems V3 SIP-enabled IP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CyberData Systems V3 SIP-enabled IP (4 stron) w kategorii Interkom. Ta instrukcja była pomocna dla 47 osób i została oceniona przez 5 użytkowników na średnio 4.3 gwiazdek

Quick Start Guide930473A

1.0 Out-of-Box and Prior to Final Installation

1.1. Download the current manual, otherwise known as an Operation Guide,

which is available on the Documentation page at the following website

address:

http://www.cyberdata.net/products/voip/digitalanalog/intercomv3/docs.html

Note You can also navigate to the Documentation page by going to

www.CyberData.net and following the steps that are indicated by

the following figures:

2.0 Select Power Source

PoE SwitchPoE Injector

Set PoE power type to Class 0 = 13WCAT6 cable recommended—

for longer distances

Be sure you are using a non-PoE switch or port

Make sure port is not in trunk mode

Set port to full duplex/ 100mbps

Spanning Tree Protocol (STP) must be disabled or Portfast enabled

12

3

VoIP V3 Outdoor Intercom

Quick Start Guide

The IP Endpoint Company

Specyfikacje produktu