Instrukcja obsługi CyberPower CSPS12V36W

CyberPower Niesklasyfikowane CSPS12V36W

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CyberPower CSPS12V36W (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 3.5 użytkowników na średnio 4.2 gwiazdek

Pobierz PDF

Strona 1/2

PRODUCT OVERVIEW

1. Pass through AC outlet

2. Network Interface Reset Button

3. Cable Guard

4. AC Input Plug

5. 3-Pin Connect

WARNINGS

• Review the following important safety warnings to avoid bodily

injury or damage to equipment during installation or operation

of this device.

• Read All instructions before attempting to install or operate

this device.

• This device is intended for indoor use only. To prevent the risk

of ﬁre or electrical shock, install in dry location free from damp

or wet environment, or potentially damp or wet environment.

• Adhere to all acceptable operating environment limitations as

listed to prevent the risk of ﬁre or electrical shock (See

speciﬁcations within user manual)

• NO user-replaceable parts within this device. To avoid bodily

injury, risk of ﬁre or electrical shock, do not attempt to remove

cover of device.

• Device is not designed for use with any alternate connection to

AC power than as stated within user speciﬁcations of this

user manual.

PACKAGE CONTENTS

• 1 x Switching Power Supply

• 1 x 3-Pin Connector

• 1 x User Manual

• 3 x Cable Ties

USER MANUAL

ONT POWER SUPPLY

CSPS12V36W

ONT POWER SUPPLY

CSPS12V36W

INTRODUCTION

Inspect CSPS12V36W for any visible damage before proceeding to

the following steps. If CSPS12V36W shows visible signs of any

damage at time of unpacking, then device should not be installed.

INSTALLATION

1. Plug 3-pin connector with attached cable into DC/Control

terminal output.

2. Using provided cable ties, secure cable to cable guard running

cable through provided holes in cable guard.

3. Plug CSPS12V36W into an AC outlet.

NOTES:

• Network Interface Reset Button - Allows for reset of DC power

output when pushed and held for 5 seconds. This provides

reset/reboot option for Optical Terminal Network (ONT) without

having to unscrew CSPS12V36W from wall plate mount, unplug

and replug at AC outlet in order to reset DC power output.

• Please use the CSPS12V36W in safe environment (Pass through

AC outlet working power higher than 1200W are not allowed)

A. NEGATIVE (-) / COMMONLY BLACK WIRE

B. POSITIVE (+) / COMMONLY RED WIRE

C. CONTROL (BATTERY CHARGE/COMM.ONLY)

A B C

Specyfikacje produktu

Marka:	CyberPower
Kategoria:	Niesklasyfikowane
Model:	CSPS12V36W
Kolor produktu:	Black,Orange
Źródło zasilania:	Prąd przemienny
Wysokość produktu:	2300 mm
Waga produktu:	4100 g
Moc silnika:	550 W
Rozmiar ostrza:	510 mm
Prędkość skokowa:	1600 spm
Typ ostrza:	Podwójne ostrze
Łatwe przechowywanie:	Tak
Funkcje uchwytu:	Ergonomiczny
Hamulec bezpieczeństwa:	Tak
Torba w zestawie:	Tak
Grubość cięcia (max):	22 mm