Instrukcja obsługi DeWalt D259804

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DeWalt D259804 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 7 użytkowników na średnio 4.4 gwiazdek

D WALTe

Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 (DEC16) Part No. N510361 Copyright © 2016

D WALTe

The following are trademarks for one or more De WALT power tools: the yellow and black color scheme; the "D" shaped air intake grill; the array of pyramids on the handgrip; the kit box

configuration; and the array of lozenge-shaped humps on the surface of thetool.

English

BREAKER TRUCK

D259804

For Use with D25980, D25960

WARNING:Improper operation or maintenance of this product could result in serious

injury and property damage. Read and understand all warnings and operating

instructions in the pavement breaker's instruction manual before operating or

performing maintenance on thisequipment.

WARNING: Turn off the pavement breaker and unplug from the power source before

making any adjustments or removing or installing attachments oraccessories.

CONTENTS (FIG. A)

1 Handle

2 Cord clip

3 Latch

4 1" (25.4 mm) chisel bit (1)

5 3" (76.2 mm) chisel bit (1)

6 Bull point chisel bit (1)

7 Chisel storage

8 Breaker alignment pin

9 Storage knobs (Fig. D)

Usage and Transport (Fig. A–D)

WARNING: Tip hazard. Be sure truck is secure prior to loading or unloading thebreaker.

To load and remove breaker on cart:

1. Lift latch 3.

2. Align tool holder with breaker alignment pin 8 and lower breaker on tocart.

NOTE: Bit retainer must be in the up lockedpositon.

3. Lower latch overbreaker.

4. Wrap cord around lower half of handle and secure end with cord clip 2.

5. To remove follow these steps in reverseorder.

Transporting

WARNING: Risk of unsafe operation. Ensure proper footing and use caution when rolling

hammer truck so it does not tip or cause loss ofbalance.

WARNING: Risk of unsafe operation. Do not exceed load limit of 110 lbs. (50 kg).

Personal injury may result. Refer to the warning label 10 (location shown in Fig. D).

CAUTION: Risk of unsafe operation. Do not transport unsecured tool. Personal injury

mayresult.

CAUTION: When transporting, be sure all chisels are secured in chisel storage by

tightening the storage knobs 9.

1. With pavement breaker secured, grasp handle 1 and slowly tilt breaker truck back so it

can be rolled on thetires.

2. When location is reached, slowly lower hammer truck to rest on base plate 11.

9

10

3

1

2

3

7

8

Fig. A

Fig. BFig. C

Fig. D

6

5

4

8

11

Final page size: 8.5x11

Specyfikacje produktu