Instrukcja obs艂ugi Digitus DN-14001-2


Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Digitus DN-14001-2 (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja by艂a pomocna dla 4 os贸b i zosta艂a oceniona przez 2.5 u偶ytkownik贸w na 艣rednio 4.9 gwiazdek

Strona 1/6
Quick Installation Guide
DN- -214001
2
1. Introduction
Intelligent, fast and intelligent state tester for connection of telephone and
network harness Check the connection between RJ45 connector and wire-
harness. Accurately determine which end of the RJ45 connector is
Connecting with the network line perfectly solves the problem that the
ordinary tester cannot determine two water. In the end, the RJ45
connector is not connected at that end, so as to save time.
2. Test
Pull the power switch up to ( ) position, QC
and the yellow power lamp of the host (QC)
is always on. The machine is in working
condition.
Insert one end of the RJ45 connector (or
RJ11 connector) into (QC) which needs to
be inspected check port.
The connector is connected with the wire
harness in good condition, and the wire
harness indicator lights are all on.
3
lf the connector is not connected properly
to the wire harness, the indicator light of -
the wire harness will not be turned on.
Function
For network 1.2.3.4.5.6.7.8.G line pairs, telephone line 1.2.3.4.5.6 line
pairs, root- -by root (pair) test, which (pair) staggered line, short circuit and
open circuit can be distinguished and determined.
Turn down the power switch to (TEST)
position, (TEST) power indicator green light
flashes.


Specyfikacje produktu

Marka: Digitus
Kategoria: Niesklasyfikowane
Model: DN-14001-2

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Digitus DN-14001-2, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮