Instrukcja obsługi Dimplex LST100
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dimplex LST100 (2 stron) w kategorii grzejnik. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 12 użytkowników na średnio 4.8 gwiazdek
Strona 1/2
This guide is for quick reference only. Please refer to the operating section for further information.
How Does the Heater Control Work?
The control allows you to choose when you want heat and at what temperature.
When using a timer mode (see below), Comfort On will display on the home screen to tell you when the heater is maintaining
the temperature displayed. Comfort Off will display when the heater is outside of a timed heating period.
When , Manual Eco or Frost modes are being used the heater will always maintain the temperature shown on the home
screen.
Set the Time
To set the date and time on the heater, press , then press the with Menu Enter Time / Date highlighted. Press or until
the correct value is shown, then press to conrm and move on to the next value. Repeat until all details are correct, Enter
and displays, then press . Set Back
The time is automatically adjusted in spring and autumn between Greenwich Mean Time (GMT) and British Summer Time
(BST).
Set the Temperature
The temperature shown on the display is the room temperature set point. This is the temperature that the
heater will maintain during heating periods. If the room temperature is above this temperature then the
heater will not operate. The heater leaves the factory with this temperature set at 21°C which represents a
typical, comfortable room temperature. If you require a dierent room temperature then press either or
on the home screen until the display shows the temperature you require.
Timer Modes
Your Quantum heater comes pre-programmed with four timer
modes. These modes dene the periods when the heater will
operate in mode. The four modes are:Comfort On
Timer Mode Description
Out All Day 6 hours heating per day in two periods
Home All Day 9 hours heating per day in one period
Holiday Set the number of days for which you are
on holiday
User Timer Customise times in four periods
Low Surface Temperature Heater
Quick Start Guide
8/53222/0 ISSUE 0
• In order to avoid overheating, Do Not Cover the heater. Do not place matrerial or garments on the heater, or obstruct
the air circulation around the heater.
• Ensure that both supply swtiches next to the heater are turned on. During the summer when no heat is required, both
wall switches can be turned o. Remember to turn both of these back on in Autumn when heat is required.
• CAUTION as some parts of this product can become very hot and cause burns. Particular attention has to be given where
children and vulnerable people are present.
• Note that due care and consideration must be taken when using this heater in series with thermal control, a program
controller, a timer or any other device that switches on the heat automatically, since a re risk exists when the heater is
accidentally covered or displaced.
Specyfikacje produktu
| Marka: | Dimplex |
| Kategoria: | grzejnik |
| Model: | LST100 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Dimplex LST100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje grzejnik Dimplex
17 Lipca 2024
17 Lipca 2024
17 Lipca 2024
17 Lipca 2024
17 Lipca 2024
17 Lipca 2024
17 Lipca 2024
17 Lipca 2024
17 Lipca 2024
17 Lipca 2024
Instrukcje grzejnik
- Emerio
- Zibro
- GUTFELS
- Optimum
- AccuLux
- Innoliving
- Emos
- Everdure
- Heller
- Beper
- Candy
- Monzana
- AstralPool
- Izzy
- Vemer
Najnowsze instrukcje dla grzejnik
25 Października 2024
25 Października 2024
21 Października 2024
21 Października 2024
5 Października 2024
26 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024