Instrukcja obsługi Doepfer A-113

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Doepfer A-113 (14 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 5.0 gwiazdek

doepfer System A - 100Subharmonic Generator A-113

1

1. Introduction

Module A-113 (Subharmonic Generator)is an addi-

tional sound source that derives four independend

so-called Subharmonics from an incoming pulse si-

gnal. The module represents the sound generation

core of the Mixtur-Trautoniumintroduced by Oskar

Sala (ref. chapter 6).

Subharmonicmeans in this context a sawtooth wave

whose frequency is derived from a master frequency.

The master frequency is divided by an integer 1...24 to

obtain the subharmonic. The subharmonics are avai-

lable as 4 single outputsas well as mix outputwith

adjustable level for each subharmonic.

The integer divisor for each subharmonic is set with

up/down buttons. The current divisors are displayed

with four 2-digit LED displays.

The combination of 4 divisors is called mixture. 4

mixtures form a preset. 50 presets can be stored and

called up within the module.

Two gate inputs are available to switch between the

4 mixtures within one preset (controlled by any gate

signals, e.g. from foot controllers).

Attention ! The A-113 module requires an additional

+5V power supply with 100mA (e.g. the separate +5V

power supply or the +5V low-cost adapter)

A-113

Subharmonic Generator

Freq.

In

Up

Mix

Out

Down

8.8.

Out 1

Level

1

Up

Down

8.8.

Level

2

Up

Down

8.8.

3

Foot

Ctr. 1

Foot

Ctr. 2

Preset

Up

Down

8.8.

Level

4

Out 4

Out 2

Store

Level

Out 3

Specyfikacje produktu