Instrukcja obsługi Doepfer A-120

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Doepfer A-120 (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 3 użytkowników na średnio 4.1 gwiazdek

doepfer System A - 100VCF 1A-120

1

1. Introduction

Module A-120 (VCF 1)is a voltage controlled low-

pass filter, which filters out the higher parts of the

sound spectrum, and lets lower frequencies pass

through.

The Cut-Off Frequency determines the point at which

filtering takes effect. You can control this manually, or

by voltage control (filter modulation, for instance by

an LFO). Three CV inputs are available, and the sum

of the voltages from these affects the filter cut-off.

VCF1 is a co-called "transistor ladder" design, with a

cut-off slope of -24 dB/octave, as in various Moog

synthesizers. That’s what gives it its classic, legendary

Moog sound.

Resonance (or Emphasis) is adjustable all the way up

to self-oscillation - in which case the filter behaves like

a sine wave oscillator.

CV 1

Resonance

CV 3

CV 2

Audio In

Lev el

Audio

Out

CV 2

Frequency

A-120

VCF 1

CV 3

Specyfikacje produktu