Instrukcja obsługi Doepfer A-151v

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Doepfer A-151v (12 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 30 osób i została oceniona przez 7 użytkowników na średnio 4.3 gwiazdek

doepfer System A - 100VCOA-110

1

1. Introduction

Module A-110 (VCO) is a voltage-controlledoscilla-

tor.

This VCO’s frequency range is about ten octaves. It

can produce four waveforms simultaneously: square,

sawtooth, triangle, and sine wave.

The Frequency or pitchof theVCO is determined by

the position of the octave (Range) switch and tuning

(Tune) knob, and by the voltage present at the CV

inputs. Frequency modulation (FM) of the VCO is

therefore a possibility. Footage (the octave of the

fundamental) is set by the Range control, and Fine

tuning controlled by the Tune knob.

You can control the pulse width of the square wave

either by hand, or by voltage control -Pulse Width

Modulation or PWM.

H Because of the analog nature of the design,

the VCO may need about 20 minutes’ warm-

up time for the tuning to become completely

stable.

SYNC

CV 2

CV 2

PW CV 1

PW CV 2

PW CV 2

PW

CV 1Range

A-110

VCO

Tune

Specyfikacje produktu