Instrukcja obsługi DSC BV-600
DSC
detektor ruchu
BV-600
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DSC BV-600 (3 stron) w kategorii detektor ruchu. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/3
The Bravo 6 is a specialized twin dual PIR motion sensor
which emphasizes immunity from false alarms caused by
pets. The Bravo 6 is equipped with a specially designed
lens
∗∗
∗∗
∗
which enables the detector to discriminate between
humans and small to mid-sized pets.
Exceptional design care and factory testing ensure years
of trouble free performance. Immunity against false
alarms from RF, static, electrical transients and white
light are all DSC designed in features.
Multi-Level Signal Processing
∗∗∗∗
∗∗∗∗∗∗
, temperature
compensation and large multi-beam lens design means
the human target will not slip by unnoticed even on a hot
summer day.
Wall or corner mounting and vertical adjustment provide
application versatility, and your client will appreciate the
small size and elegant simplicity of the case design.
Features
• Immune to pets under 2.5 ft/0.75 m (up to 85 lbs/38 kg)
• Microprocessor based
• Advanced Multi-Level Signal (MLS) Processing∗∗∗∗
∗∗∗∗∗∗
• Twin, dual element, low noise sensors
• High level static protection
• High level transient protection
• UV stable lens
• High level of white light immunity
• Excellent RF immunity
• DSC Temperature compensation circuitry
• Harsh/Normal environment jumper
• LED on/off jumper
• Vertical adjustment
• SMD construction
• Super quiet operation
• Wall/Corner mounting
• Blends with any decor
• Compact size
∗∗
∗∗∗
Protected by one or more of the following patents:
Canada CA2196014, US 5923250
∗∗∗∗
∗∗∗∗
∗∗
Protected by one or more of the following patents:
Canada 2099971, US 5444432
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Dual PIR
Motion Detector
Specifications
• Operating voltage: 9.5 VDC to 14.5 VDC
• Supply voltage ripple: 3.0 VP-P @ 12 VDC
• Stand-by current: 16.5 mA
• Current in alarm (LED on): 17.5 mA
• Contact rating (alarm & tamper): 100 mA @ 24 VDC
• Alarm contact resistor in common: 28 ohm 0.25 W
• Operating temperature: 32°F to120°F / 0°C to 49°C
• Storage temperature: -40°F to140°F / -40°C to 60°C
• Operating humidity: 5% to 93% RH non-condensing
• Storage humidity: up to 99% RH non-condensing
• Radiated RF immunity:
20 V/m with 80% AM over range, 27MHz to 1.0GHz
• Conducted RF immunity:
10V with 80% AM over range 150kHz to 80MHz
• Static immunity: 15 kV
• Transient immunity: 2.4 kV @ 1.2 joules
• Walk detection speed: 0.5'/s to 10'/s (0.15 m/s to 3 m/s)
• Coverage angle (wall/wall lens): 100° maximum
• Vertical adjustment: +2° to -5°
• Mounting heights:
7' to 10.5' / 2.1m to 3.2m (nominal 7.5' / 2.3m)
Physical
Dimensions
4.9" H × 2.76" W × 1.75" D (124.5 mm × 70 mm × 44.5 mm)
Colour
White with white lens
Models
• BV-600/PBV-600: Form A alarm contact
• BV-601/PBV-601: Form A alarm contact & tamper switch
• BV-602/PBV-602: Form C alarm contact & tamper switch
Beam Patterns for Bravo 6 Series Lens
Side View
Top View
Locating the Detector
Select a detector location that will provide the coverage
required keeping in mind the following potential problems
Reflective Surfaces
Do not aim the detector at reflective surfaces such as
mirrors or windows as this may distort the coverage pattern
or reflect sunlight directly onto the detector.
Air Flow
Avoid locations that are subject to direct high air flow such
as near an air duct outlet.
Moisture
Do not locate the detector near sources of steam or oil.
The Sun
Do not aim the detector such that it will receive direct or
reflected (mirror) sunlight.
Obstruction
Do not limit the coverage by large objects within the
detection area such as plants or filing cabinets.
Pet Rejection
Do not aim the detector at a stairway which a pet has
access to.
Do not place furniture or objects higher than 3 ft / 0.9 m,
which a pet can climb onto (e.g. a cat on a couch), closer
than 7 ft /2.1 m to the detector.
Specyfikacje produktu
| Marka: | DSC |
| Kategoria: | detektor ruchu |
| Model: | BV-600 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z DSC BV-600, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje detektor ruchu DSC
14 Września 2024
26 Sierpnia 2024
26 Sierpnia 2024
26 Sierpnia 2024
24 Sierpnia 2024
22 Sierpnia 2024
20 Sierpnia 2024
18 Sierpnia 2024
Instrukcje detektor ruchu
- Perel
- Crestron
- Fibaro
- EQ3
- Busch-Jaeger
- Suevia
- Theben
- Steren
- Schneider
- Hikvision
- Yale
- Optex
- Ledvance
- Devolo
- Chacon
Najnowsze instrukcje dla detektor ruchu
9 Stycznia 2025
29 Grudnia 2024
29 Grudnia 2024
26 Grudnia 2024
26 Grudnia 2024
25 Grudnia 2024
17 Grudnia 2024
17 Grudnia 2024
17 Grudnia 2024
17 Grudnia 2024