Instrukcja obsługi EarthQuaker Devices Hummingbird


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EarthQuaker Devices Hummingbird (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 30 osób i została oceniona przez 15.5 użytkowników na średnio 4.8 gwiazdek

Strona 1/2
O P E R A T I O N M A N U A L
©2018 EarthQuaker Devices LLC
www.earthquakerdevices.com
<<< Power Requirements >>>
<<< Tech Specs >>>
Current Draw: 10mA
This device take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We
always recommend pedal-specic, transformer-isolated wall-wart power supplies or multiple
isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.
Switching-type power supplies, daisy chains and non-pedal specic power supplies do not lter
dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
Input Impedance: 50K Ohm Output Impedance: <10K Ohm
<<< Warranty >>>
This device has a limited lifetime warranty. If it breaks, we will x it. Should you encounter any
issues, please email info@earthquakerdevices.com.
<<< Flexi-Switching >>>
This device features Flexi-Switch
Technology! This relay-based, true bypass switching style
allows you to simultaneously use momentary and latching-style switching.
For standard latching operation, tap the footswitch once to activate the effect and then tap
again to bypass.
For momentary operation, hold the footswitch down for as long as you’d like to use the effect.
Once you release the switch, the effect will be bypassed.
Since the switching is relay-based, it requires power to pass signal.


Specyfikacje produktu

Marka: EarthQuaker Devices
Kategoria: Niesklasyfikowane
Model: Hummingbird

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z EarthQuaker Devices Hummingbird, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą