Instrukcja obsługi Edifier NeoBuds Plus

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Edifier NeoBuds Plus (7 stron) w kategorii Zatyczka do uszu. Ta instrukcja była pomocna dla 32 osób i została oceniona przez 3 użytkowników na średnio 4.0 gwiazdek

True Wireless Earbuds with Active Noise Cancellation

Model: EDF200165

NeoBuds Plus

Manual

EN 1. Power ON/OFF

Open or close the case to power on/o.

2. First pairing

1. Once powered on, the earbuds will auto-enter Bluetooth pairing.

2. Select "EDIFIER NeoBuds Plus" from your device list to connect.

1. Power on and then press and hold the button on the case for about 3s.

LEDs will be lit one by one from left to right in a circulating pattern.

2. Select "EDIFIER NeoBuds Plus" from your device list to connect.

Note: For subsequent use, the headphones will automatically connect to the device used last time.

3. Pairing for new device

1. Pair device A with the earbuds and don't take the earbuds out.

2. Re-enter Bluetooth pairing and select "EDIFIER NeoBuds Plus" in device

B settings to connect.

3. Select "EDIFIER NeoBuds Plus" in device A settings to connect manually

4. Multipoint connection

5. Charging

Input: 5V 200mA(Earbuds) 5V 1A(Charging case)

Note:

1. Make sure the USB po is completely d before charging.

2. Make sure the contact suace is clean before charging with a

wireless charger.

6. Controls

Note

1. Default sound control: High noise cancellation / Ambient sound / Noise cancellation o.

2. "—" Press and hold.

1. Place the earbuds in the case and keep it open.

2. Press the button on the case 3 times to re-enter the left & right

connection and clear the pairing records. LEDs will be lit one by

one from sides to center in a circulating pattern and then will blink

twice if successful.

7. Reset

Indicator light

EDIFIER NeoBuds Plus

Bluetooth

EDIFIER NeoBuds Plus

Bluetooth

3s

x3

①

A

B

②

③

EDIFIER NeoBuds Plus

Bluetooth

A

EDIFIER NeoBuds Plus

Bluetooth

3s

● Call

● Music

x1

x2

x1

x1

x2

x1

Press AreaPress Area

Press AreaPress Area

x1x1

x2x2

x3x3

－－

or

Specyfikacje produktu