Instrukcja obsługi Ei Electronics Ei161RC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ei Electronics Ei161RC (16 stron) w kategorii Detektor dymu. Ta instrukcja była pomocna dla 33 osób i została oceniona przez 6 użytkowników na średnio 5.0 gwiazdek

IDEALLY INSTALL IN THE CENTRE OF CEILING

AT LEAST 300mm FROM LIGHT FITTINGS

LOCATE IONISATION ALARMS AWAY FROM

KITCHENS TO PREVENT NUISANCE ALARMS

ENSURE LIVE MAINS IS CORRECTLY

CONNECTED TO L TERMINALS ON ALL

INTERCONNECTED ALARMS - OTHERWISE

UNITS WILL BE DAMAGED

DO NOT FIT ACTUAL ALARM UNTIL ALL

BUILDING WORK IS COMPLETED TO AVOID

CONTAMINATION. AFTER CHECKING

OPERATION, COVER SMOKE ALARM WITH

DUST COVER UNTIL REQUIRED FOR USE

DISCONNECT THE ALARM BEFORE APPLYING

HIGH VOLTAGE INSULATION TESTS TO WIRING

DO NOT ATTEMPT TO OPEN THE ALARM AS

IT IS PERMANENTLY SEALED FOR SAFETY

DO NOT CONNECT ALTERNATIVE ENERGY

SOURCES e.g. WIND, SOLAR, UPS WITH

NON-SINUSOIDAL OUTPUTS

(see INSTALLATION section on page 10)

INTERCONNECT ALL ALARMS

230V~ SMOKE & HEAT ALARMS

INSTALLER INSTRUCTIONS

Ei141 - IonisationEi144 - HeatEi146 - Optical

RECHARGEABLE LITHIUM CELL BACK-UP

Ei161RC - IonisationEi166RC - OpticalEi164RC - Heat

ALKALINE PRIMARY BATTERY BACK-UP

© Ei Electronics 2012P/N B16008 Rev3

Specyfikacje produktu